31 lines (21 loc) · 1.81 KB

Basic OTA library for ESP32 and VSCode - PlatformIO

By Kuba Andrýsek

This project is inspirated by Lastminuteengineers.com

Integration takes only 2 minutes and it's very easy to use

Usage

Example project

First run

Create new PlatformIO project - Eespressif ESP32 Dev Module
Copy example code into main.cpp
Change WiFi SSID and PASSWORD to suit your credentials
Open platformio.ini and after framework = arduino insert to new line upload_flags = -p 3232. It will fix upload issue.
Connect ESP32 to the PC and flash software. For the first time ESP must be connected by cable!

Further usage

If you see in your terminal IP adress of your ESP proceed to the next point. If not, try the First run again.
Open platformio.ini and add upload_port = YOUR ESP32 IP (IP adress is displayed in the terminal) after upload_flags = -p 3232 Example:upload_port = 192.168.0.166
That`s all 😃. From now on your software will be uploaded via the WiFI.

Succes upload message - Upload status

Succes upload message - Terminal

License - MIT