Fixed some typos

Author: rsoric

examples/Inkplate10/Diagnostics/Inkplate10_Factory_Programming_VCOM/Inkplate10_Factory_Programming_VCOM.ino

@@ -13,7 +13,7 @@
  *
  *              Tests will also be done, to pass all tests:
  *              - Edit the WiFi information in test.cpp.
- *              - Connect a slave device via EasyC on address 0x28 (you may change this in test.cpp also).
+ *              - Connect a slave device via EasyC on address 0x30 (you may change this in test.cpp also).
  *                In the InkplateEasyCTester folder, you can find the code for uploading to Dasduino Core 
  *                or Dasduino ConnectPlus to convert Dasduino to an I2C slave device for testing an easyC connector
  *                if you don't have a device with address 0x30.

examples/Inkplate10/Diagnostics/Inkplate10_RTC_Calibration/Inkplate10_RTC_Calibration.ino

@@ -26,6 +26,8 @@ Inkplate display(INKPLATE_1BIT); // Create an object on Inkplate library and als
 #define REFRESH_DELAY 1000 // Delay between refreshes
 unsigned long time1;       // Time for measuring refresh in millis
 
+#define MAX_PARTIAL_UPDATES 9 // How many partial updates to do before a full refresh
+
 // Variable that keeps count on how much screen has been partially updated
 int n = 0;
 
@@ -60,7 +62,6 @@ void setup()
     // The real offset depends on the mode and it is equal to the: offset in ppm for specific mode * offset value in
     // decimal. For example: mode 0 (4.34 ppm), offset value 15 = + 65.1 ppm every 2 hours
     // See 8.2.3 in the datasheet for more details
-    
     display.rtcSetClockOffset(1, -63); 
 
     // How to calculate this offset?
@@ -126,7 +127,7 @@ void loop()
         display.setCursor(480, 380);        // Set position of the text
         printTime(hours, minutes, seconds); // Print the time on screen
 
-        if (n > 9) // Check if you need to do full refresh or you can do partial update
+        if (n > MAX_PARTIAL_UPDATES) // Check if you need to do full refresh or you can do partial update
         {
             display.display(true); // Do a full refresh
             n = 0;

examples/Inkplate5/Diagnostics/Inkplate5_Factory_Programming_VCOM/Inkplate5_Factory_Programming_VCOM.ino

@@ -185,7 +185,7 @@ void showSplashScreen(float vComVoltage)
     display.drawBitmap3Bit(0, 0, demo_image, demo_image_w, demo_image_h);
     display.setTextColor(0, 7);
     display.setTextSize(1);
-    display.setCursor(5, 583);
+    display.setCursor(5, 516);
     display.print(vComVoltage, 2);
     display.print("V");
     display.display();

examples/Inkplate5/Diagnostics/Inkplate5_RTC_Calibration/Inkplate5_RTC_Calibration.ino

@@ -25,6 +25,8 @@ Inkplate display(INKPLATE_1BIT); // Create an object on Inkplate library and als
 #define REFRESH_DELAY 1000 // Delay between refreshes
 unsigned long time1;       // Time for measuring refresh in millis
 
+#define MAX_PARTIAL_UPDATES 9 // How many partial updates to do before a full refresh
+
 // Variable that keeps count on how much screen has been partially updated
 int n = 0;
 
@@ -125,7 +127,7 @@ void loop()
         display.setCursor(370, 260);        // Set position of the text
         printTime(hours, minutes, seconds); // Print the time on screen
 
-        if (n > 9) // Check if you need to do full refresh or you can do partial update
+        if (n > MAX_PARTIAL_UPDATES) // Check if you need to do full refresh or you can do partial update
         {
             display.display(true); // Do a full refresh
             n = 0;

examples/Inkplate6/Diagnostics/Inkplate6_RTC_Calibration/Inkplate6_RTC_Calibration.ino

@@ -26,6 +26,8 @@ Inkplate display(INKPLATE_1BIT); // Create an object on Inkplate library and als
 #define REFRESH_DELAY 1000 // Delay between refreshes
 unsigned long time1;       // Time for measuring refresh in millis
 
+#define MAX_PARTIAL_UPDATES 9 // How many partial updates to do before a full refresh
+
 // Variable that keeps count on how much screen has been partially updated
 int n = 0;
 
@@ -127,7 +129,7 @@ void loop()
         display.setCursor(270, 270);        // Set position of the text
         printTime(hours, minutes, seconds); // Print the time on screen
 
-        if (n > 9) // Check if you need to do full refresh or you can do partial update
+        if (n > MAX_PARTIAL_UPDATES) // Check if you need to do full refresh or you can do partial update
         {
             display.display(true); // Do a full refresh
             n = 0;

examples/Inkplate6PLUS/Diagnostics/Inkplate6PLUS_RTC_Calibration/Inkplate6PLUS_RTC_Calibration.ino

@@ -25,6 +25,8 @@ Inkplate display(INKPLATE_1BIT); // Create an object on Inkplate library and als
 #define REFRESH_DELAY 1000 // Delay between refreshes
 unsigned long time1;       // Time for measuring refresh in millis
 
+#define MAX_PARTIAL_UPDATES 9 // How many partial updates to do before a full refresh
+
 // Variable that keeps count on how much screen has been partially updated
 int n = 0;
 
@@ -126,7 +128,7 @@ void loop()
         display.setCursor(380, 360);        // Set position of the text
         printTime(hours, minutes, seconds); // Print the time on screen
 
-        if (n > 9) // Check if you need to do full refresh or you can do partial update
+        if (n > MAX_PARTIAL_UPDATES) // Check if you need to do full refresh or you can do partial update
         {
             display.display(true); // Do a full refresh
             n = 0;