Issue with Windows 11

[kevinpray1]

When the program starts, I am getting a .NET error - the program works, but the error message continues to pop up and needs to be dismissed every time. I am running the latest version of Win11 Home and the .NET framework.

[pvdublo7]

Yes - getting the same error since ,NET Framework updated to 4.8.1. Win 11 home - confirmed.

Love this little tool - can we get this fixed? Would so appreciate that.

[SIRprise]

Thanks for the report and screenshot!
Seems to have to do with the PerformanceCounter...

You could try it by running in compatibility mode, described here: https://allthings.how/how-to-run-an-app-in-compatibility-mode-in-windows-11/

You could also try to use https://www.maketecheasier.com/windows-performance-monitor/ and try to find the _diskReadCounter and the _diskWriteCounter of "PhysicalDisk" and there the value _Total. The tool is capturing the values from there and it seems it cannot find it (I'm at work... will try it later)

Are you using ARM64?

I'm testing it with a virtual pc Win11 Enterprise 10.0.22000 and it works. (Updating now...)

[pvdublo7]

Hello SIR!

Thanks for the update. Attached are my Win11 specs. Happening on Win 11 Pro and Home.

Will monitor here for the update. Let me know if you need anything else. Checking out Performance Monitor now.

Thank you for digging into this for us! Paul

[pvdublo7]

Not exactly sure where to find _diskWriteCounter of "PhysicalDisk" and there the value _Total.

This is what I pulled up in Performance Monitor:

[pvdublo7]

Compatibility Mode seems to be helping. No NET Framework error for the moment, but will restart the PC and see how it goes after the restart. Stand by.

UPDATE - no luck. Error returned after restart. Would there be a particular version of Windows for compatibility that might work better?

[pvdublo7]

Another screenshot of issue:

[SIRprise]

Hi Paul,
if compatibility mode works, you could deactivate autostart in the tool and make a link manually in the autostart. After that you can edit the link and configure compatibility mode there.

Thanks you for the screenshots: The right one is what we need. I only have a german windows here:

You need to add a new indicator for testing by pressing the + button: I think the english translation of the category you need to choose is "Physical Disk" (I did a mistake and used "logical disk" in the screenshot) and then "bytes read" and "bytes written". It is important that you can see instances in the box below: here you should find "_Total" or "C:". The tool seems to fail to find them.
If your computer is very slow or busy while booting up, this could also be a problem and there are tools an options to delay the start and start sequence of the autostart programs.

[SIRprise]

I think I will add a logging mechanism to the tool soon to collect the needed information and catch that error and give the chance to the user to retry.

[SIRprise]

Ok, I made a new version. It can't fix your problem, but it logs the information it has in folder ./logs
It includes also a little bit more error handling. You can find it here: https://github.com/SIRprise/SSD-LED/actions/runs/3184655594
(See the artifact below)

[pvdublo7]

Thank you, sir! I will run it for a couple of days and send along the logs. Thanks very much for helping with this.
Paul

[SIRprise]

A normal log should look like:

2022-10-05 16:44:39.986 +02:00 [INF] Starting SSD-LED v1.0.7.0
2022-10-05 16:44:44.466 +02:00 [INF] Found the following Physical Disks: ["2 E:","0 C:","_Total","1 D:"]
2022-10-05 16:45:24.675 +02:00 [INF] Exiting...
2022-10-05 16:45:33.833 +02:00 [INF] Starting SSD-LED v1.0.7.0
2022-10-05 16:45:35.999 +02:00 [INF] Found the following Physical Disks: ["2 E:","0 C:","_Total","1 D:"]
2022-10-05 16:46:33.751 +02:00 [INF] Exiting...

I had another idea what could trigger the problem: maybe you have chosen a single drive for monitoring in settings and saved the settings and the drive is not there anymore. So it could help to delete or modify the settings file here (find it here ##7). The tool started as a proof of concept and I need to make it more bullet proof and more professionel step by step.

[pvdublo7]

ssd_led20221005.log

Here is a log file for you.

With regard to the drive idea you have, no - never changed the drive or the drive settings. The problem is happening on 3 computers - so it's not that. I wish it were that easy!

All started every since .NET Framework latest update was installed.

[pvdublo7]

I found the config file -
config.zip

I don't see anything odd. Maybe you can. The only drive I want to monitor is the C: drive.