Firmware, wrong IP address on LCD

[nk25719]

Describe the bug
A clear and concise description of what the bug is.
Short Summary of the expected behavior:
Short Summary of the buggy behavior:

The IP address reported on the LCD 192.168.10.1 does not match the IP address reported on the serial monitor: STA IP Address: 192.168.10.198

When browsed to the IP address 192.168.10.1 that directed me to the login page served by my router.

When browsed to the IP address 192.168.10.198 that directed me to a webpage of below ss:

To Reproduce
Steps to reproduce the behavior:

1. Read the IP address displayed on the LCD screen of the Krake
2. Connect krake to the COM port, click on the serial monitor, press reboot, read the IP address reported.

Expected behavior
A clear and concise description of what you expected to happen.

The LCD should display the correct IP address designated to the krake unit.

Screenshots
If applicable, add screenshots to help explain your problem.

Hardware description
Model: Krake rev2
Serial Number: LB0008
Other:

Test Equipment
Model:
Serial Number:

Additional context
Add any other context about the problem here.

[nk25719]

cc:
@TheBakedPotato
@ForrestErickson

[TheBakedPotato]

@nk25719 Ohhhh, that's cause the IP address is being cutoff. My math is apparently quite bad but I thought the length of STA IP: xyz.xyz.xyz.xyz is less than 20. It is actually 23. 🤦

At this time I do not know how to cause the text on the LCD to scroll and such so I thought it was okay. It looks like the text for the IP address will have to scroll across the screen because there is not enough space to accommodate an identifier for the type of IP address and the IP address itself.

[TheBakedPotato]

Also, this is only present on the PR. This is not on main yet since the PR 381 has not been merged at the time of this comment.