How to Perform Measurements Using HydraHarp Control Panel Settings via API

[Brodis82]

Hello,

I am currently working with the HydraHarp Control Panel and need to replicate the settings for a measurement.
I am using HydraHarp 400.
I have attached images of the control panel with the specific parameters I want to use.

The settings are as follows:

HydraHarp Axis Panel:

Time Axis:
Min: 0 ns
Max: 100 ns
Count Axis:
Min: 100
Max: 1000000
Mode: Log
HydraHarp Control Panel (Sync Input):

ZeroCr: 10 mV
Divider: None
Discr.: 50 mV
Offset: -1000 ps
HydraHarp Control Panel (Inputs 1.4):

Input Channels 1-4:
ZeroCr: 10 mV
Discr.: 50 mV
Offset: 0 ps
HydraHarp Control Panel (Acquisition):

Resolution: 64 ps
Time: 5 s
Offset: 0 ns
Trce/Block: 0
Mode: INT
Stop at: 4294967295 cnt
Could someone guide me on how to configure these parameters and perform a measurement using the API?

Thank you!

[tpoint75]

Time Axis:
Min: 0 ns
Max: 100 ns
Count Axis:
Min: 100
Max: 1000000
Mode: Log

The axis must be set in the plot (plt.xxx this is part of the matplotlib - read the documentation)

HydraHarp Control Panel (Sync Input):
ZeroCr: 10 mV
Divider: None
Discr.: 50 mV
Offset: -1000 ps

HydraHarp Control Panel (Inputs 1.4):
Input Channels 1-4:
ZeroCr: 10 mV
Discr.: 50 mV
Offset: 0 ps

can be set in the config.ini:
config

The rest is part of the python script. I think this would be a good start:
Demo_HistogramSimple