Speaker results/measurements mixed.

[Christ-Aserco]

Speaker result get mixed.

Just dragging all measurements to REW and than pressing optimize gives a strange result.

14:57:39 [INFO] Pinpointing crossover frequencies for each speaker...
14:58:22 [LOG] Calculated optimal crossover frequency between C and the subwoofer: 28.930668999999998Hz, nearest match in the unit: 40Hz
14:58:22 [LOG] Calculated optimal crossover frequency between FHL and the subwoofer: 19.042972Hz, nearest match in the unit: 40Hz
14:58:22 [LOG] Calculated optimal crossover frequency between FHR and the subwoofer: 19.042972Hz, nearest match in the unit: 40Hz
14:58:22 [LOG] Calculated optimal crossover frequency between FL and the subwoofer: 39.550788Hz, nearest match in the unit: 40Hz
14:58:23 [LOG] Calculated optimal crossover frequency between FR and the subwoofer: 39.916999Hz, nearest match in the unit: 40Hz
14:58:23 [LOG] Calculated optimal crossover frequency between SBL and the subwoofer: 38.452155Hz, nearest match in the unit: 40Hz
14:58:23 [LOG] Calculated optimal crossover frequency between SBR and the subwoofer: 127.441428Hz, nearest match in the unit: 120Hz
14:58:23 [LOG] Calculated optimal crossover frequency between SLA and the subwoofer: 127.441428Hz, nearest match in the unit: 120Hz
14:58:23 [LOG] Calculated optimal crossover frequency between SRA and the subwoofer: 29.296879999999998Hz, nearest match in the unit: 40Hz

The FHL and FHR should be at about 120Hz
All other speakers are full range (not used as full range, but they are).
C, FL and FR should be detected as about 20HZ
SBL, SBR SLA and SRA should be detected as about 40Hz

Attached the audyssey results and the extracted values.
Bios 7.2.2 dayton subs.zip