Makefile.am

# top-level Makefile for NUT

# Export certain values for ccache which NUT ci_build.sh can customize,
# to facilitate developer iteration re-runs of "make" later.
# At least GNU and BSD make implementations are okay with this syntax.
@NUT_AM_MAKE_CAN_EXPORT@@NUT_AM_EXPORT_CCACHE_NAMESPACE@export CCACHE_NAMESPACE=@CCACHE_NAMESPACE@
@NUT_AM_MAKE_CAN_EXPORT@@NUT_AM_EXPORT_CCACHE_BASEDIR@export CCACHE_BASEDIR=@CCACHE_BASEDIR@
@NUT_AM_MAKE_CAN_EXPORT@@NUT_AM_EXPORT_CCACHE_DIR@export CCACHE_DIR=@CCACHE_DIR@
@NUT_AM_MAKE_CAN_EXPORT@@NUT_AM_EXPORT_CCACHE_PATH@export CCACHE_PATH=@CCACHE_PATH@
@NUT_AM_MAKE_CAN_EXPORT@@NUT_AM_EXPORT_CCACHE_PATH@export PATH=@PATH_DURING_CONFIGURE@

# include directory for aclocal
ACLOCAL_AMFLAGS = -I m4

# Autotools' SUBDIRS (our values are listed below) allow for powerful recursive
# recipe automation, with one notable weakness: the dirs are processed in a
# loop sequentially, even in parallel builds (each such sub-make is parallel
# then). In our case, the HTML/PDF render of ChangeLog can take a minute of
# work in "docs" while we are not building anything in other dirs. On the up
# side, that approach does allow for dirs with dependencies to get built first
# deterministically. For more details search for "am__recursive_targets" in the
# generated Makefile.
#
# The commonly suggested way out of this predicament is to consolidate numerous
# Makefile.am recipes into one, which alone properly defines all the needed
# interdependecies that are "known" to one instance of the `make` process.
# This however loses the ability to quickly e.g. `cd tests && make check`, so
# the next layer is to re-introduce Makefiles in sub-directories that define
# a few popular targets to perform via the one big top-level Makefile.
#
# Our approach here is to merge the two solutions: do use SUBDIRS the way
# autotools handle them for the hordes of `*-recursive` targets for us, but
# define more explicitly the targets for hot code paths (all, check) so that
# they can run first for certain different directories (in parallel if asked
# to) with "knowledge" of dependencies, and then a bit wastefully maybe re-run
# those directories via autotools integration. They should be quick no-ops by
# then in the anticipated common use-cases.
#
# List of source subdirectories to build and distribute, used to spawn automake
# (alas sequential) target recipes. The order matters, as several subdirectories
# depend on stuff in "common" or tools being built first! Also "data" depends
# (during "dist" time) on scripts in "tools".
SUBDIRS = include common clients conf drivers tools data \
  lib scripts server tests docs/man docs

# Note: not generated from SUBDIRS, because not all are recursive:
SUBDIRS_ALL_RECURSIVE = \
	all/include \
	all/common \
	all/clients \
	all/conf \
	all-recursive/data \
	all-drivers \
	all/tools/nut-scanner \
	all/tools/nutconf \
	all-recursive/tools \
	all/lib \
	all-recursive/scripts \
	all/server \
	all/tests/NIT \
	all/tests \
	all/docs \
	all/docs/man \
	all-recursive/docs \
	all-recursive/tests

# Library creation happens in a number of subdirectories, may be optional
# (e.g. C++ ones are not built without a suitable compiler and enablement).
# List maintenance is aided by this query:
#   git grep -E 'LTLIBRARIES' '*.am'
SUBDIRS_ALL_LIBS_LOCAL = \
	all-libs-local/include \
	all-libs-local/common  \
	all-libs-local/clients \
	all-libs-local/drivers \
	all-libs-local/tests   \
	all-libs-local/tools   \
	all-libs-local/tools/nut-scanner

# First target often defines default behavior, and in automake is always at least:
#   all: all-recursive
# with maybe custom dependencies of "all:" from a Makefile.am tacked on too
# (which used to cause us a lot of headache, building same things twice at
# the same time).

#all all-recursive all-am-local all-local: all-fanout-maybe
all-recursive: all-fanout-maybe

# Verbosity for fanout rule tracing; 0/1 (or "default" that may auto-set
# to 0 or 1 in some rules below)
SUBDIR_MAKE_VERBOSE = default

# Run the standard build if going sequential (or with unknown MAKEFLAGS),
# or fanout if parallel (presuming GNU/BSD/Sun make at least):
all-fanout-maybe:
	+@if [ x"$(NUT_MAKE_SKIP_FANOUT)" = xtrue ] ; then \
		if [ x"$(SUBDIR_MAKE_VERBOSE)" != x0 ] ; then \
			echo "  SUBDIR-MAKE	$@: skip optimization for parallel make - NUT_MAKE_SKIP_FANOUT is set" ; \
		fi ; \
		exit 0 ; \
	  fi ; \
	  case "-$(MAKEFLAGS) $(AM_MAKEFLAGS)" in \
		*-j|*-j" "*|*-{j,l}{0,1,2,3,4,5,6,7,8,9}*|*-[jl][0123456789]*|*{-l,--jobs,--load-average,--max-load}" "{-,0,1,2,3,4,5,6,7,8,9}*|*--jobserver*|*--jobs" "[0123456789]*|*--load-average" "[0123456789]*|*--max-load" "[0123456789]*) \
			if [ x"$(SUBDIR_MAKE_VERBOSE)" != x0 ] ; then \
				echo "  SUBDIR-MAKE	$@: implement optimization for parallel make as 'make all-fanout-subdirs'" ; \
			fi ; \
			$(MAKE) $(AM_MAKEFLAGS) all-fanout-subdirs ;; \
		*) \
			if [ x"$(SUBDIR_MAKE_VERBOSE)" != x0 ] ; then \
				echo "  SUBDIR-MAKE	$@: skip optimization for parallel make - we seem to run sequentially now, seen MAKEFLAGS='$(MAKEFLAGS)' AM_MAKEFLAGS='$(AM_MAKEFLAGS)'" ; \
			fi ;; \
	  esac

# We start with a pass to `make all` in `common` dir because our wild recipes
# (with other subdirs ensuring the libraries they need have been built) can
# sometimes cause parallel compilation and library generation for same files
# driven by different make processes that do not know they aim for same goal,
# with some "make" implementations...
# Just in case we followed up with "make doc", since our wild recipes could end
# up writing into same files and so corrupting them (fixes applied, but...)

# FIXME: Alas, we still tend to step on our toes when making everything at
# once from scratch, so still do benefit from pre-making the libraries:
all-fanout-staged:
	+$(MAKE) $(AM_MAKEFLAGS) all/include
	+$(MAKE) $(AM_MAKEFLAGS) all/common
	+$(MAKE) $(AM_MAKEFLAGS) all-fanout-libs
	+$(MAKE) $(AM_MAKEFLAGS) all-fanout-subdirs

all-fanout-subdirs: $(SUBDIRS_ALL_RECURSIVE)

all-fanout-libs all-libs-local: $(SUBDIRS_ALL_LIBS_LOCAL)

#all all-am-local all-local:
#	+@cd common && $(MAKE) $(AM_MAKEFLAGS) all
#	+@$(MAKE) $(AM_MAKEFLAGS) all-recursive
#	+@$(MAKE) $(AM_MAKEFLAGS) doc
#	+@$(MAKE) $(AM_MAKEFLAGS) doc

bindir = @bindir@
sbindir = @sbindir@
driverexecdir = @driverexecdir@
cgiexecdir = @cgiexecdir@

# Automatically update the libtool script if it becomes out-of-date
# See https://www.gnu.org/software/libtool/manual/html_node/LT_005fINIT.html
LIBTOOL_DEPS = @LIBTOOL_DEPS@
libtool: $(LIBTOOL_DEPS)
	$(SHELL) ./config.status libtool

# COPYING and other autotools-standard files are included automatically
# by automake. Note that the INSTALL file is (re-)imposed by autotools
# runs and is essentially a manual on configure script general usage, so
# NUT's actual installation notes have had to use a different filename.
EXTRA_DIST = LICENSE-GPL2 LICENSE-GPL3 LICENSE-DCO MAINTAINERS

# Since the renaming of documentation to `*.adoc` extension to help IDE
# and GitHub UIs to render the source files in a pretty fashion, we need
# to list them:
EXTRA_DIST += INSTALL.nut.adoc UPGRADING.adoc TODO.adoc NEWS.adoc README.adoc

# The document is now part of qa-guide; the script might be a bit git-oriented,
# but can be useful in builds from tarball, probably. Anyhow, having the doc
# without the tool which it documents is odd.
EXTRA_DIST += ci_build.sh ci_build.adoc \
	builds/nut-driver-enumerator-test/ci_build.sh

# Tarballs created by `make dist` include the `configure.ac` and `m4/*` sources
# but lack NUT magic logic to recreate the `configure` script if someone would
# want to adapt it to their autotools or locally fix a tarball-based build.
EXTRA_DIST += autogen.sh

# Help also the tarball users contribute properly:
EXTRA_DIST += .editorconfig

# automake xompilation wrapper
EXTRA_DIST += compile

if KEEP_NUT_REPORT
nodist_data_DATA = config.nut_report_feature.log
endif KEEP_NUT_REPORT

# Not too different from automake generated recursive rules at first sight,
# but here we do not loop all subdirs sequentially - instead, a sub-make
# (maybe parallel itself and with parallel flags passed) with a certain
# target in specified dir is the goal, all as separate targets for this
# level's Makefile:
SUBDIR_TGT_RULE = ( \
	[ x"$${TGT-}" != x ] || TGT="`echo '$@' | awk -F/ '{print $$1}'`" ; \
	[ x"$${DIR-}" != x ] || DIR="`echo '$@' | sed 's,^[^/]*/,,'`" ; \
	if [ x"$(SUBDIR_MAKE_VERBOSE)" != x0 ] ; then \
		echo "  SUBDIR-MAKE	STARTING: 'make $$TGT' in $$DIR ..." ; \
	fi ; \
	cd "$(abs_builddir)/$${DIR}" && \
	$(MAKE) $(AM_MAKEFLAGS) $${SUBDIR_TGT_MAKEFLAGS-} "$${TGT}" || { RES=$$?; echo "  SUBDIR-MAKE	FAILURE: 'make $$TGT' in $$DIR" >&2 ; exit $$RES ; } ; \
	if [ x"$(SUBDIR_MAKE_VERBOSE)" != x0 ] ; then \
		echo "  SUBDIR-MAKE	SUCCESS: 'make $$TGT' in $$DIR" ; \
	fi ; \
	)

# A way to quickly handle SUBDIRS_ALL_LIBS_LOCAL as dependency for all others
# (aka `make all-libs-local` also in root dir). Libs themselves have complex
# inter-dependencies which we do not spell out here and let one recipe handle
# the intimate details of other directories' deliverables (so far?). Query:
#   git grep -E '(LTLIBRARIES|\.la([ :'"`printf '\t'`"']|$))' '*.am'

### Delivers: nut_version.h
all-libs-local/include:
	+@$(SUBDIR_TGT_RULE)

### Delivers: libcommon.la libcommonclient.la libcommonstr.la
###           (consume only one of these at a time!)
### Delivers: libcommonversion.la (only version methods)
### Delivers: libparseconf.la libnutconf.la libnutwincompat.la
### Requires-ext: include/nut_version.h
### Requires-int: libparseconf.la libcommonclient.la
all-libs-local/common: all-libs-local/include
	+@$(SUBDIR_TGT_RULE)

### Delivers: libupsclient.la libnutclient.la libnutclientstub.la
### Delivers: libupsclient-version.h
### LIB-Requires-ext: common/libcommonclient.la
### Requires-ext: common/libcommon.la common/libcommonclient.la
### Requires-ext: common/libcommonversion.la
### Requires-ext: common/libparseconf.la
### Requires-int: libupsclient.la
all-libs-local/clients: all-libs-local/common
	+@$(SUBDIR_TGT_RULE)

### Delivers: libdummy.la libdummy_serial.la libdummy_upsdrvquery.la
### Delivers: libdummy_mockdrv.la libserial-nutscan.la
### LIB-Requires-ext: common/libcommon.la common/libparseconf.la
### Requires-ext: common/libcommon.la common/libparseconf.la
### Requires-ext: clients/libupsclient.la (dummy-ups only)
### Requires-int: libdummy.la libdummy_upsdrvquery.la
### Requires-int: libdummy_serial.la
all-libs-local/drivers: all-libs-local/common
	+@$(SUBDIR_TGT_RULE)

### Delivers: libdriverstubusb.la
### LIB-Requires-ext: #COMMENTED-AWAY# common/libcommon.la
### Requires-ext: common/libcommon.la common/libnutconf.la
### Requires-ext: clients/libnutclient.la clients/libnutclientstub.la
### Requires-ext: drivers/libdummy_mockdrv.la
### Requires-int: libdriverstubusb.la
all-libs-local/tests: all-libs-local/common
	+@$(SUBDIR_TGT_RULE)

### Delivers: generated sources and/or headers for nut-scanner
### No dependencies: actually runs as part of autogen.sh but may be
### re-run during development when USB or SNMP driver sources change.
all-libs-local/tools:
	+@$(SUBDIR_TGT_RULE)

### Delivers: libnutscan.la
### LIB-Requires-ext: drivers/libserial-nutscan.la
### LIB-Requires-ext: common/libnutwincompat.la common/libcommonstr.la
### LIB-Requires-ext: common/libcommonversion.la
### HDR-Requires-ext: clients/libupsclient-version.h
### HDR-Requires-ext: nut-scanner/nutscan-snmp.h nut-scanner/nutscan-usb.h
###       (generated by nut-scanner-deps/tools aliased as all-libs-local/tools)
### Requires-int: libnutscan.la
### Note: indirectly (ltdl) may use installed libupsclient.so
###       however does directly use libupsclient-version.h
###       for hints to find it at run-time
all-libs-local/tools/nut-scanner: all-libs-local/drivers all-libs-local/common all-libs-local/clients all-libs-local/tools
	+@$(SUBDIR_TGT_RULE)

# Handle all SUBDIRS_ALL_RECURSIVE in a way that dependencies can be specified,
# and portably to different make program implementations. Note we may revisit
# some dirs via "all-recursive" of a parent after "all" in them first, but it is
# expected to be a quick no-op (beneficial overall in parallel make situation).
# NOTE: "lib" dir only delivers pkg-config metadata or legacy scripts for any
# third-party development to integrate with NUT libs, no library recipes there.

all/conf \
all/lib \
.ChangeLog.adoc-parsed.latest/docs \
ChangeLog.adoc-parsed/docs \
all-recursive/data:
	+@$(SUBDIR_TGT_RULE)

all/include: all-libs-local/include
	+@$(SUBDIR_TGT_RULE)

prep-src-docs/docs/man:
	+@SUBDIR_TGT_MAKEFLAGS='MAINTAINER_DOCS_PREP_MAN_DELAY=3'; export SUBDIR_TGT_MAKEFLAGS; $(SUBDIR_TGT_RULE)

prep-src-docs/docs:
	+@DOCS_NO_MAN=true; export DOCS_NO_MAN; $(SUBDIR_TGT_RULE)

all/docs/man: prep-src-docs/docs/man
	+@$(SUBDIR_TGT_RULE)

# Note: we optionally sort of depend on ChangeLog.adoc so it is pre-made and
# pre-processed for html/pdf renders (if any are requested), so they surely
# do not compete for it to be made by independent "make" processes later on.
# BUT we do not want to (re-)build ChangeLog if no (relevant) DOC_BUILD_LIST
# types are enabled.
MAINTAINER_ASCIIDOCS_CHANGELOG_DELAY = 0
all/docs: prep-src-docs/docs/man
	+@case "@DOC_BUILD_LIST@" in \
		*pdf*|*html-single*|*html-chunked*) \
			echo "  DOC-CHANGELOG-ASCIIDOC	Pre-generate ChangeLog artifacts before the bulk of $@ ..." ; \
			MAINTAINER_ASCIIDOCS_CHANGELOG_DELAY="$(MAINTAINER_ASCIIDOCS_CHANGELOG_DELAY)" \
			export MAINTAINER_ASCIIDOCS_CHANGELOG_DELAY && \
			$(MAKE) $(AM_MAKEFLAGS) MAINTAINER_ASCIIDOCS_CHANGELOG_DELAY="$(MAINTAINER_ASCIIDOCS_CHANGELOG_DELAY)" ChangeLog.adoc && \
			$(MAKE) $(AM_MAKEFLAGS) MAINTAINER_ASCIIDOCS_CHANGELOG_DELAY="$(MAINTAINER_ASCIIDOCS_CHANGELOG_DELAY)" .ChangeLog.adoc-parsed.latest/docs && \
			echo "  DOC-CHANGELOG-ASCIIDOC	Pre-generate ChangeLog artifacts before the bulk of $@ : SUCCESS" ;; \
		*) ;; \
	  esac
	+@$(MAKE) $(AM_MAKEFLAGS) prep-src-docs/docs
	+@DOCS_NO_MAN=true; export DOCS_NO_MAN; $(SUBDIR_TGT_RULE)

all-recursive/docs: all/docs all/docs/man
	+@$(SUBDIR_TGT_RULE)

# Dependencies below are dictated by who needs whose library from another dir
# (generated by a sub-make there, so we pre-emptively ensure it exists to avoid
# conflicts of several make's writing to same files). Aided by this query:
#   git grep -E '/[^ ]*\.la([ :]|$)' '*.am'
# It does help to spell out all dependencies, even if transitive, to ensure
# that the top-level make completes needed (all-libs*) targets before drilling.

### Requires-int: libparseconf.la libcommonclient.la
all/common: all/include all-libs-local/common
	+@$(SUBDIR_TGT_RULE)

### Requires-ext: common/libcommon.la common/libcommonclient.la
### Requires-ext: common/libparseconf.la
### Requires-ext: common/libcommonversion.la
### Requires-int: libupsclient.la
all/clients: all/common all-libs-local/clients
	+@$(SUBDIR_TGT_RULE)

### Summary of drivers/ subdir dependencies:
### Requires-ext: common/libcommon.la common/libparseconf.la
### Requires-ext: common/libcommonversion.la
### Requires-ext: clients/libupsclient.la (dummy-ups only)
### Requires-int: libdummy.la libdummy_upsdrvquery.la
### Requires-int: libdummy_serial.la

# TODO in the future: propagate the knowledge of whether we are building
# dummy-ups by default (if only SOME_DRIVERS are requested) from configure.ac,
# and so decide if a goal to build it would conflict or not with "all/drivers"
# (or alternately if it should be or not be part of "all-drivers", keeping the
# current web of definitions in place). Primarily for the benefit of tests/NIT.

# NOTE: The dummy-ups driver program relies on both libupsclient (ext) and
# libdummy_upsdrvquery.la (int) - and so requires all-libs-local/drivers too.
if SOME_DRIVERS
# Here we do wholesale subdir all-libs-local at the moment, to
# build whichever drivers are enabled (no idea if dummy-ups is
# in the default list - FIXME: configure.ac could tell us, so
# we could provide it for tests/NIT anyway...)
all/drivers: all-libs-local/clients all-libs-local/common all-libs-local/drivers
	+@$(SUBDIR_TGT_RULE)

all-drivers: all/drivers
else !SOME_DRIVERS
# We build all drivers, let dummy-ups be built with respect for
# libupsclient while not blocking other driver builds on that.
# NUTSW_DRIVERLIST_DUMMY_UPS acts as an equivalent of DOCS_NO_MAN
# in a way, to let other (non dummy-ups) drivers get built in a
# separate target with separate dependency trail, then "all-drivers"
# should depend on both "dummy-ups" and the rest in so constrained
# "all/drivers". This allows to ultimately not order one after another.
dummy-ups$(EXEEXT)/drivers: all-libs-local/clients all-libs-local/common all-libs-local/drivers
	+@$(SUBDIR_TGT_RULE)

all/drivers: all/common all-libs-local/drivers
	+@SUBDIR_TGT_MAKEFLAGS='NUTSW_DRIVERLIST_DUMMY_UPS=dummy'; export SUBDIR_TGT_MAKEFLAGS; $(SUBDIR_TGT_RULE)

all-drivers: dummy-ups$(EXEEXT)/drivers all/drivers
endif !SOME_DRIVERS

### Requires-ext: common/libcommon.la common/libparseconf.la
### Requires-ext: common/libcommonversion.la
all/server: all-libs-local/common
	+@$(SUBDIR_TGT_RULE)

### LIB-Requires-ext: drivers/libserial-nutscan.la
### LIB-Requires-ext: common/libnutwincompat.la common/libcommonstr.la
### LIB-Requires-ext: common/libcommonversion.la
### Requires-ext: clients/libupsclient-version.h
### Requires-int: libnutscan.la
all/tools/nut-scanner: all-libs-local/include all-libs-local/common \
	all-libs-local/drivers all-libs-local/clients \
	all-libs-local/tools/nut-scanner
	+@$(SUBDIR_TGT_RULE)

# only libnutscan is needed for nutconf,
# but we do wholesale subdir all-libs-local at the moment...
### Requires-ext: common/libcommon.la common/libnutconf.la
### Requires-ext: common/libcommonversion.la
### Requires-ext: tools/nut-scanner/libnutscan.la
all/tools/nutconf: all-libs-local/tools/nut-scanner all-libs-local/common
	+@$(SUBDIR_TGT_RULE)

all-recursive/tools: all/tools/nutconf all/tools/nut-scanner
	+@$(SUBDIR_TGT_RULE)

# Prereqs for NIT are runnable upsd, upsc, upsmon, dummy-ups, sample configs...
# For the actual "make check-NIT" runs - also python scripts and/or compiled
# tests/cppnit (if available).
# FIXME: technically of all drivers we need dummy-ups here;
# if it is not enabled among SOME_DRIVERS, things can get funny...
# But then we should also consider what is enabled by configure and what is not.
# Maybe we are doing a quick build not to be tested at all? :-/
all/tests/NIT: all/clients all/server all-drivers all-recursive/tools all-recursive/data
	+@$(SUBDIR_TGT_RULE)

### LIB-Requires-ext: #COMMENTED-AWAY# common/libcommon.la
### Requires-ext: common/libcommon.la common/libnutconf.la
### Requires-ext: clients/libnutclient.la clients/libnutclientstub.la
### Requires-ext: drivers/libdummy_mockdrv.la
### Requires-int: libdriverstubusb.la
all/tests: all-libs-local/tests all-libs-local/drivers all-libs-local/common all-libs-local/clients
	+@$(SUBDIR_TGT_RULE)

all-recursive/tests: all/tests/NIT all/tests
	+@$(SUBDIR_TGT_RULE)

if HAVE_MINGW_RESGEN
if HAVE_WINDOWS
### Requires-ext: common/libcommon.la
### Requires-ext: common/libcommonversion.la
all/scripts/Windows: all-libs-local/common
	+@$(SUBDIR_TGT_RULE)
else !HAVE_WINDOWS
all/scripts/Windows:
	+@$(SUBDIR_TGT_RULE)
endif !HAVE_WINDOWS
else !HAVE_MINGW_RESGEN
all/scripts/Windows:
	+@$(SUBDIR_TGT_RULE)
endif !HAVE_MINGW_RESGEN

all-recursive/scripts: all/scripts/Windows
	+@$(SUBDIR_TGT_RULE)

# ----------------------------------------------------------------------
# flags to pass to ./configure when calling "make distcheck" and "make
# distcheck-light". Try to check as many features as possible! Also
# need to give augeas-lenses-dir, hotplug-dir and udev-dir, and request
# PyNUT to be installed near the NUT-Monitor app (if feasible) so that
# staged install does not fail. Note that by default PyNUT tries to go
# into the system Python site-packages location, and autotools does not
# tweak paths not using ${prefix} so `make distcheck` fails for it as
# it does not play with a `DESTDIR` either.

DISTCHECK_FLAGS = --with-all --with-ssl --with-doc=auto --enable-docs-man-for-progs-built-only=no --with-pynut=app --with-nut_monitor=force CXXFLAGS='@NUT_CONFIG_CXXFLAGS@' CFLAGS='@NUT_CONFIG_CFLAGS@' CPPFLAGS='@NUT_CONFIG_CPPFLAGS@' LDFLAGS='@NUT_CONFIG_LDFLAGS@'
DISTCHECK_LIGHT_FLAGS = --with-all=auto --with-ssl=auto --with-doc=auto --enable-docs-man-for-progs-built-only=no --with-pynut=app --with-nut_monitor=force CXXFLAGS='@NUT_CONFIG_CXXFLAGS@' CFLAGS='@NUT_CONFIG_CFLAGS@' CPPFLAGS='@NUT_CONFIG_CPPFLAGS@' LDFLAGS='@NUT_CONFIG_LDFLAGS@'
DISTCHECK_LIGHT_MAN_FLAGS = --with-all=auto --with-ssl=auto --with-doc=man --enable-docs-man-for-progs-built-only=no --with-pynut=app --with-nut_monitor=force CXXFLAGS='@NUT_CONFIG_CXXFLAGS@' CFLAGS='@NUT_CONFIG_CFLAGS@' CPPFLAGS='@NUT_CONFIG_CPPFLAGS@' LDFLAGS='@NUT_CONFIG_LDFLAGS@'
DISTCHECK_VALGRIND_FLAGS = --with-all=auto --with-ssl=auto --with-doc=skip --with-valgrind CXXFLAGS='@NUT_CONFIG_CXXFLAGS@ -g' CFLAGS='@NUT_CONFIG_CFLAGS@ -g' CPPFLAGS='@NUT_CONFIG_CPPFLAGS@' LDFLAGS='@NUT_CONFIG_LDFLAGS@' --with-pynut=app --with-nut_monitor=force

# Note: this rule uses envvar DISTCHECK_FLAGS expanded at run-time
DISTCHECK_CONFIGURE_FLAGS = ${DISTCHECK_FLAGS}		\
 PKG_CONFIG_PATH='@PKG_CONFIG_PATH@'			\
 --with-systemdsystemunitdir='$${prefix}/lib/systemd/system' \
 --with-systemdsystempresetdir='$${prefix}/usr/lib/systemd/system-preset' \
 --with-systemdshutdowndir='$${prefix}/lib/systemd/system-shutdown' \
 --with-systemdtmpfilesdir='$${prefix}/usr/lib/tmpfiles.d' \
 --with-augeas-lenses-dir='$${prefix}/usr/share/augeas/lenses'		\
 --with-hotplug-dir='$${prefix}/etc/hotplug'		\
 --with-udev-dir='$${prefix}/etc/udev'			\
 --with-devd-dir='$${prefix}/etc/devd'			\
 --with-pynut=app --with-nut_monitor=force

# Note: trickery with prefix below is needed to expand it from
# DISTCHECK_CONFIGURE_FLAGS defaults defined above in a manner
# that is meaningful for sub-make program (gets stripped away
# otherwise and breaks custom distchecks).

# Helper for CI runs: ensure presence of pre-built man pages
# (even if faked where lack and can not build them), so that
# the majority of distcheck logic can pass.
# See also docs/man/Makefile.am
if KNOWN_UNABLE_MANS
if DOC_INSTALL_DISTED_MANS
distcheck-ci: distcheck
dist-ci: dist
else !DOC_INSTALL_DISTED_MANS
distcheck-ci: distcheck-fake-man
dist-ci: dist-fake-man
endif !DOC_INSTALL_DISTED_MANS
else !KNOWN_UNABLE_MANS
if WITH_MANS
distcheck-ci: distcheck
dist-ci: dist
else !WITH_MANS
if HAVE_ASCIIDOC
distcheck-ci: distcheck
dist-ci: dist
else !HAVE_ASCIIDOC
if DOC_INSTALL_DISTED_MANS
distcheck-ci: distcheck
dist-ci: dist
else !DOC_INSTALL_DISTED_MANS
distcheck-ci: distcheck-fake-man
dist-ci: dist-fake-man
endif !DOC_INSTALL_DISTED_MANS
endif !HAVE_ASCIIDOC
endif !WITH_MANS
endif !KNOWN_UNABLE_MANS

# Helper for a number of recipes below that explicitly agree to not require
# always real man pages (but require them to dist => distcheck-something)
# for CI or developer iterations on environments with incomplete tool kits:
distcheck-light-DIST_ALL_PAGES:
	@echo "Starting $@" >&2
	+@cd "$(abs_builddir)/docs/man" && $(MAKE) $(AM_MAKEFLAGS) all
	+@cd "$(abs_builddir)/docs/man" && $(MAKE) $(AM_MAKEFLAGS) distcheck-light-DIST_ALL_PAGES
	@echo "Completed $@: preparation of pre-built man pages for dist tarball, possibly faked" >&2

# In some recipes we `configure --with-docs=skip`, so "make dist" should not
# hiccup on lack of the page files (nor try to make them); not using simple
# distcheck-light-DIST_ALL_PAGES step due to custom logic!
distcheck-light-DIST_ALL_PAGES-docs-skipped:
	@echo "Starting $@" >&2
	+@cd $(abs_builddir)/docs/man && $(MAKE) $(AM_MAKEFLAGS) prep-src-docs
	+@cd $(abs_builddir)/docs/man && $(MAKE) $(AM_MAKEFLAGS) FAKE_PAGES_BUMP_SRC=false distcheck-light-DIST_ALL_PAGES
	@echo "Completed $@: preparation of pre-built man pages for dist tarball, possibly faked" >&2

# Here we generate man pages (if absent) or fake them
# Require other dependencies as usual distcheck does;
# be sure to pass through caller's DISTCHECK_FLAGS (if any)
distcheck-fake-man: distcheck-light-DIST_ALL_PAGES
	@echo "Starting $@" >&2
	+prefix='$${prefix}'; if test x"$(DISTCHECK_FLAGS)" = x ; then \
		$(MAKE) $(AM_MAKEFLAGS) distcheck ; \
	 else \
		$(MAKE) $(AM_MAKEFLAGS) DISTCHECK_FLAGS="$(DISTCHECK_FLAGS)" distcheck ; \
	 fi
	@echo "Completed $@: strict distcheck, but with possibly faked pre-built man pages" >&2

dist-fake-man: distcheck-light-DIST_ALL_PAGES
	@echo "Starting $@" >&2
	+prefix='$${prefix}'; $(MAKE) $(AM_MAKEFLAGS) dist
	@echo "Completed $@: strict dist, but with possibly faked pre-built man pages" >&2

# Here we allow to skip docs if tools are absent, so "make dist"
# should not hiccup on lack of the page files (but MAY make them
# if it can); be relaxed toward other dependencies.
distcheck-light: distcheck-light-DIST_ALL_PAGES
	@echo "Starting $@" >&2
	+prefix='$${prefix}'; $(MAKE) $(AM_MAKEFLAGS) DISTCHECK_FLAGS="$(DISTCHECK_LIGHT_FLAGS)" distcheck
	@echo "Completed $@: relaxed distcheck, with possibly faked pre-built man pages" >&2

# Require man pages to be built (or fail trying), but not other docs;
# be relaxed toward other dependencies.
distcheck-light-man:
	@echo "Starting $@" >&2
	+prefix='$${prefix}'; $(MAKE) $(AM_MAKEFLAGS) DISTCHECK_FLAGS="$(DISTCHECK_LIGHT_MAN_FLAGS)" distcheck
	@echo "Completed $@: relaxed distcheck, with real man pages" >&2

if HAVE_VALGRIND
# Make the check in current build, if possible
memcheck:
	@echo "Starting $@" >&2
	@echo "See also scripts/valgrind in NUT sources for a helper tool"
	+@cd $(builddir)/tests && $(MAKE) $(AM_MAKEFLAGS) -s $@

# Make a distcheck (and check in particular) with enabled valgrind and debug info
# Here we skip docs so "make dist" should not hiccup on lack of the page files
# (nor try to make them); not using simple distcheck-light-DIST_ALL_PAGES step
# due to custom logic!
distcheck-valgrind: distcheck-light-DIST_ALL_PAGES-docs-skipped
	@echo "Starting $@" >&2
	@echo "See also scripts/valgrind in NUT sources for a helper tool"
	+prefix='$${prefix}'; $(MAKE) $(AM_MAKEFLAGS) DISTCHECK_FLAGS="$(DISTCHECK_VALGRIND_FLAGS)" distcheck
	@echo "Completed $@: relaxed distcheck, without man pages ('pre-built' placeholders in dist archive), running tests under valgrind" >&2
else !HAVE_VALGRIND
memcheck distcheck-valgrind:
	@echo "Starting $@" >&2
	@echo "See also scripts/valgrind in NUT sources for a helper tool"
	@echo "  SKIP	$@ : valgrind was not detected on this system by configure script" >&2
endif !HAVE_VALGRIND

# workaround the dist generated files that are also part of the distribution
# Note that distcleancheck is disabled for now, while waiting for a proper
# solution, that do not break older unix systems
#distcleancheck_listfiles = \
#	find . -type f -exec sh -c 'test -f $(srcdir)/{} || echo {}' ';'
distcleancheck:
	@:

# Quick alias for root dir recipe:
realclean: maintainer-clean

# Files made by our targets:
CLEANFILES = *-spellchecked *.adoc-parsed cppcheck*.xml config.log.inplace-outer
DISTCLEANFILES = ChangeLog

# Most of the files generated by custom rules in the configure script
# or by autogen.sh are cleaned by the Makefile.am in their directories.
# Files below are re-created by running `configure` script and may be
# wiped by a `make distclean`:
DISTCLEANFILES += config.log configure~
#???# configure.ac~
DISTCLEANFILES += include/config.h.in~

# Files made by autotools and common rituals of the configure script,
# these are needed to run the configure script itself so are not wiped
# by a mere `make distclean`; most of these are copied by autotools
# from their installation, or made by `automake` etc. on the system
# which generates `configure`; rebuilding NUT after deleting these
# requires `autogen.sh` script to be re-run (and tools available):
MAINTAINERCLEANFILES = INSTALL
MAINTAINERCLEANFILES += aclocal.m4 config.guess config.sub
MAINTAINERCLEANFILES += configure
MAINTAINERCLEANFILES += depcomp install-sh ltmain.sh test-driver ar-lib
MAINTAINERCLEANFILES += m4/libtool.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4 m4/lt~obsolete.m4
MAINTAINERCLEANFILES += Makefile.in .dirstamp include/config.h.in

# Executed after default rules
maintainer-clean-local:
	$(AM_V_at)rm -f missing || true

# Do not let $SUBDIRS/Makefile rules delete their local .deps because
# this breaks our ability to clean up (e.g. some common/.../*.Plo files
# are included by generated Makefiles from other subdirectories, so they
# should be available during their clean-up). Just in case, we make sure
# here that their sub-distcleans complete first.
distclean-local:
	+@for DIR in $(SUBDIRS) ; do \
		if test -f "$${DIR}/Makefile" ; then \
			echo "  DISTCLEAN	in $${DIR}" >&2 ; \
			( cd "$${DIR}" && $(MAKE) $(AM_MAKEFLAGS) -s distclean ) || exit ; \
		fi ; \
	 done
	$(AM_V_at)rm -rf .inst tmp autom4te.cache
	$(AM_V_at)find "$(builddir)" -type d -name '.deps' | while read DIR ; do rm -rf "$${DIR}" ; done

# Hook the documentation building and validating recipes
# Note: these are optionally available (as determined during configure runs)
# Only require SPELLCHECK_REPORT_MAYBE_UPDATED_DICT=yes for the last entry
# (reduce noise for spellcheck-interactive)
# Maint: grep -l 'SPELLCHECK_' `git grep -lw spellcheck '*.am'`
SPELLCHECK_DIRS_MOST = \
	spellcheck/docs \
	spellcheck/docs/man \
	spellcheck/conf \
	spellcheck/data \
	spellcheck/data/htmlcgi \
	spellcheck/scripts \
	spellcheck/scripts/Solaris \
	spellcheck/scripts/Windows \
	spellcheck/scripts/devd \
	spellcheck/scripts/external_apis \
	spellcheck/scripts/hotplug \
	spellcheck/scripts/installer \
	spellcheck/scripts/obs \
	spellcheck/scripts/python \
	spellcheck/scripts/systemd \
	spellcheck/scripts/udev \
	spellcheck/scripts/upsdrvsvcctl

# Same but with an info notice, so runs alone last
SPELLCHECK_DIRS_LAST = spellcheck/tests/NIT

SPELLCHECK_DIRS = $(SPELLCHECK_DIRS_MOST) $(SPELLCHECK_DIRS_LAST)

$(SPELLCHECK_DIRS_MOST): prep-src-docs/docs/man prep-src-docs/docs
	+@TGT="$(SPELLCHECK_TGT)"; export TGT; $(SUBDIR_TGT_RULE)

$(SPELLCHECK_DIRS_LAST): prep-src-docs/docs/man prep-src-docs/docs $(SPELLCHECK_DIRS_MOST)
	+@SUBDIR_TGT_MAKEFLAGS="SPELLCHECK_REPORT_MAYBE_UPDATED_DICT=yes"; \
	  export SUBDIR_TGT_MAKEFLAGS; \
	  TGT="$(SPELLCHECK_TGT)"; export TGT; \
	  $(SUBDIR_TGT_RULE)

# We want to check all files even if some have errors, so sub-make with "-k":
# Tricky TGT to pass sort-of-same rules (and dir list) as spellcheck,
# but using the correct make target for this goal:
# FIXME: fanned-out recipes tend to fail early despite "make -ks", so for
#  now we retry with a not-fanned-out attempt to cover most touch-files
spellcheck spellcheck-interactive:
	+@SUBDIR_TGT_MAKEFLAGS="$${SUBDIR_TGT_MAKEFLAGS-} -k -s " ; export SUBDIR_TGT_MAKEFLAGS ; \
	  if [ x"$(NUT_MAKE_SKIP_FANOUT)" = xtrue ] ; then \
		RES=0 ; \
		if [ x"$(SUBDIR_MAKE_VERBOSE)" != x0 ] ; then \
			echo "  SUBDIR-MAKE	$@: skip optimization for parallel make - NUT_MAKE_SKIP_FANOUT is set" ; \
		fi ; \
		(cd $(builddir)/docs && $(MAKE) $(AM_MAKEFLAGS) -k -s $(abs_top_builddir)/docs/.prep-src-docs) || RES=$$? ; \
		(cd $(builddir)/docs/man && $(MAKE) $(AM_MAKEFLAGS) -k -s $(abs_top_builddir)/docs/man/.prep-src-docs) || RES=$$? ; \
		for D in $(SPELLCHECK_DIRS_MOST) ; do \
			D="`echo "$$D" | sed 's,^spellcheck/,,'`" ; \
			(cd "$(builddir)/$$D" && $(MAKE) $(AM_MAKEFLAGS) -k -s $@) || RES=$$? ; \
		done ; \
		for D in $(SPELLCHECK_DIRS_LAST) ; do \
			D="`echo "$$D" | sed 's,^spellcheck/,,'`" ; \
			(cd "$(builddir)/$$D" && $(MAKE) $(AM_MAKEFLAGS) SPELLCHECK_REPORT_MAYBE_UPDATED_DICT=yes -k -s $@) || RES=$$? ; \
		done ; \
		exit $$RES ; \
	  fi ; \
	  SUBDIR_MAKE_VERBOSE="$(SUBDIR_MAKE_VERBOSE)" ; \
	  if [ x"$(SUBDIR_MAKE_VERBOSE)" = xdefault ] ; then \
		SUBDIR_MAKE_VERBOSE=0 ; \
	  fi ; \
	  export SUBDIR_MAKE_VERBOSE ; \
	  ( $(MAKE) $(AM_MAKEFLAGS) SPELLCHECK_TGT='$@' SUBDIR_MAKE_VERBOSE="$${SUBDIR_MAKE_VERBOSE}" -k -s $(SPELLCHECK_DIRS) && exit ; \
	  echo "WARNING: FAILED fanned-out attempt in $@, retrying with NUT_MAKE_SKIP_FANOUT" >&2 ; \
	  $(MAKE) $(AM_MAKEFLAGS) NUT_MAKE_SKIP_FANOUT=true SPELLCHECK_TGT='$@' -k -s $(SPELLCHECK_DIRS) ) || exit ; \
	  if [ x"$@" = xspellcheck-interactive ] ; then \
		echo "SUCCESS: $@: follow up with spellcheck-quick to revise and update timestamps"; \
		$(MAKE) $(AM_MAKEFLAGS) spellcheck-quick ; \
	  fi

# Auto-parallel recipe (if current 'make' implementation supports the "-j N"
# syntax; the optional MAXPARMAKES may be set in NUT CI farm style builds):
SET_PARMAKES_OPT = \
	+@PARMAKES_OPT=""; \
	  case " $(MAKEFLAGS) $(AM_MAKEFLAGS)" in \
		*"j"*) ;; \
		*) \
			if [ "$${MAXPARMAKES-}" -gt 1 ] 2>/dev/null ; then \
				true ; else MAXPARMAKES=8 ; \
			fi ; \
			PARMAKES_OPT="-j $${MAXPARMAKES}" ; \
		;; \
	  esac

spellcheck-quick:
	+@$(SET_PARMAKES_OPT); \
	  $(MAKE) $(AM_MAKEFLAGS) -k -s ${PARMAKES_OPT} spellcheck

# Run auto-parallel recipe, and if something fails - re-run interactively:
spellcheck-interactive-quick:
	+@$(MAKE) $(AM_MAKEFLAGS) -k -s spellcheck-quick && exit ; \
	  echo "WARNING: in $@: make spellcheck-quick failed, retrying with spellcheck-interactive" >&2 ; \
	  if [ x"$(SUBDIR_MAKE_VERBOSE)" = xdefault ] ; then \
		SUBDIR_MAKE_VERBOSE=1 ; export SUBDIR_MAKE_VERBOSE ; \
	  fi ; \
	  $(MAKE) $(AM_MAKEFLAGS) -k -s spellcheck-interactive

# Note: the "all-docs" and "check-docs" targets may require tools not
# found by `configure` script (and so avoided by conventional recipes)
# such as PDF generators, so it should only be called at developer's
# discretion, choice and risk. The "check-man" targets covers source
# texts, man pages and HTML rendering of man pages, as enabled by tools.
doc spellcheck-sortdict spellcheck-report-dict-usage \
all-docs check-docs \
man all-man man-man check-man check-man-man html-man all-html:
	+cd $(abs_top_builddir)/docs && $(MAKE) $(AM_MAKEFLAGS) -s $(abs_top_builddir)/docs/.prep-src-docs
	+cd $(abs_top_builddir)/docs/man && $(MAKE) $(AM_MAKEFLAGS) -s $(abs_top_builddir)/docs/man/.prep-src-docs
	+cd $(abs_top_builddir)/docs && $(MAKE) $(AM_MAKEFLAGS) $@

INSTALL.nut UPGRADING NEWS README:
	+cd $(abs_top_builddir)/docs && $(MAKE) $(AM_MAKEFLAGS) ../$(@F).adoc-parsed && cp -f ../$(@F).adoc-parsed ../$(@F)

# Workarounds for https://github.com/github/markup/issues/1095
# require direct definition of our attributes in each source
# document, in order for GitHub Web-UI to render them nicely
# (unfortunately, asciidoc configs and includes are not handled
# at this time). Hopefully this will go away at some point.
# The following rule updates definitions in source asciidoc files
# between GH_MARKUP_1095_INCLUDE_BEGIN/END tags with contents of
# current docs/asciidoc-vars.conf file. It is intended to be used
# by maintainers (or brave contributors who would dare edit those
# definitions), to apply them into the committed document sources.
# Not bothering about with "make dist" constraints etc. - changes
# the contents of srcdir directly and intentionally.
# NOTE: Using `read -r` per POSIX standard to avoid backslashes
# being treated as escape characters:
# https://pubs.opengroup.org/onlinepubs/9699919799/utilities/read.html
MAINTAINER_ASCIIDOCS_RECIPE_DEBUG_STREAM = /dev/null
#MAINTAINER_ASCIIDOCS_RECIPE_DEBUG_STREAM = &2

maintainer-asciidocs:
	@USEDREV="`git log -1 --oneline --pretty=format:'%h (%cs) %s' docs/asciidoc-vars.conf`" || exit ; \
	 USEDREV_NOSUBJ="`git log -1 --oneline --pretty=format:'%h (%cs)' docs/asciidoc-vars.conf`" || exit ; \
	 echo "$@: Updating asciidoc text sources with docs/asciidoc-vars.conf as of commit: $${USEDREV}"; \
	 echo "//GH_MARKUP_1095_INCLUDE_BEGIN//$${USEDREV}" > docs/asciidoc-vars.conf.lastrev.tmp || exit ; \
	 find . -name '*.adoc' -or -name '*.txt' | ( \
	  FILES=""; \
	  while read F ; do \
	    $(EGREP) '^//+GH_MARKUP_1095_INCLUDE_(BEGIN|END)' "$$F" >/dev/null \
	    || { echo "$@: SKIP: no GH_MARKUP_1095_INCLUDE_* tags: $$F"; continue ; } ; \
	    rm -f "$${F}"*.tmp || exit ; \
	    EXT="1.tmp"; \
	    while IFS='' read -r LINE ; do \
	        case "$${LINE}" in \
	            "//GH_MARKUP_1095_INCLUDE_BEGIN"*) EXT="2.tmp" ; continue ;; \
	            "//GH_MARKUP_1095_INCLUDE_END"*|"////GH_MARKUP_1095_INCLUDE_END"*) EXT="3.tmp" ; continue ;; \
	        esac ; \
	        printf '%s\n' "$${LINE}" >> "$${F}.$${EXT}" || exit ; \
	    done < "$$F" || { echo "$@: FAILED injection for $${F}" >&2; exit 1; } ; \
	    if test -s "$${F}.2.tmp" && test -z "`diff "$${F}.2.tmp" docs/asciidoc-vars.conf | tr -d '\n'`" ; then \
	        rm -f "$${F}"*.tmp ; \
	        echo "$@: SKIP: no changes: $$F"; continue ; \
	    fi; \
	    cat "$${F}.1.tmp" docs/asciidoc-vars.conf.lastrev.tmp docs/asciidoc-vars.conf > "$${F}.tmp" \
	    && echo '//GH_MARKUP_1095_INCLUDE_END//' >> "$${F}.tmp" \
	    && cat "$${F}.3.tmp" >> "$${F}.tmp" \
	    && mv -f "$${F}.tmp" "$${F}" \
	    || { echo "$@: FAILED injection for $${F}" >&2; exit 1; } ; \
	    echo "$@: UPDATED: $$F"; \
	    FILES="$${FILES} $${F}"; \
	    rm -f "$${F}"*.tmp ; \
	  done; \
	  rm -f docs/asciidoc-vars.conf.lastrev.tmp; \
	  if test -z "$${FILES}" ; then \
	    echo "$@: OVERALL-SKIP: No text files found with GH_MARKUP_1095_INCLUDE_ tags, or obsoleted docs/asciidoc-vars.conf contents";\
	  else \
	    echo "$@: OVERALL-UPDATED: You may now want to:"; \
	    echo "    make spellcheck-interactive-quick"; \
	    echo "    git add -p $${FILES} && git commit -sm 'Update NUT documentation sources with current docs/asciidoc-vars.conf: $${USEDREV_NOSUBJ}'"; \
	  fi; \
	 )

check-NIT check-NIT-devel check-NIT-sandbox check-NIT-sandbox-devel:
	+cd $(builddir)/tests/NIT && $(MAKE) $(AM_MAKEFLAGS) $@

VERSION_DEFAULT: dummy-stamp
	@abs_top_srcdir='$(abs_top_srcdir)' ; \
	 abs_top_builddir='$(abs_top_builddir)' ; \
	 export abs_top_srcdir ; export abs_top_builddir ; \
	 NUT_VERSION_QUERY=UPDATE_FILE '$(abs_top_srcdir)/tools/gitlog2version.sh'

CLEANFILES += VERSION_DEFAULT.tmp
EXTRA_DIST += VERSION_DEFAULT

# Best-effort delivery for (overly?) customized distros, e.g. via
#   echo NUT_VERSION_FORCED_SEMVER=1.1.1 > VERSION_FORCED_SEMVER
dist-hook:
	for D in "$(abs_top_srcdir)" "$(abs_top_builddir)" ; do \
	    for F in VERSION_FORCED VERSION_FORCED_SEMVER ; do \
	        if [ -s "$$D/$$F" ] ; then \
	            cat "$$D/$$F" > "$(top_distdir)/$$F" || true ; \
	        fi ; \
	    done ; \
	done

# This target adds syntax-checking for committed shell script files,
# to avoid surprises and delays in finding fatal typos after packaging
###
### Note: currently, shellcheck target calls check-scripts-syntax
### so when both are invoked at once, in the end the check is only
### executed once. Later it is anticipated that shellcheck would
### be implemented by requiring, configuring and calling the tool
### named "shellcheck" for even more code inspection and details.
### Still, there remains value in also checking the script syntax
### by the very version of the shell interpreter that would run
### these scripts in production usage of the resulting packages.
###
check-scripts-syntax:
	@echo 'NOTE: modern bash complains about scripts using backticks (warning not error), which we ignore in NUT codebase for portability reasons: `...` obsolete, use $$(...)'
	@RUNBASH=bash; if [ -x /bin/bash ] && /bin/bash -c 'echo $${BASH_VERSION}' | $(EGREP) '^[456789]\.' ; then RUNBASH=/bin/bash ; else if [ -x /usr/bin/env ] ; then RUNBASH="/usr/bin/env bash"; fi; fi ; \
	 for F in `git ls-files || find . -type f` ; do \
	    case "`file "$$F"`" in \
	        *"Bourne-Again shell script"*) ( set -x ; $$RUNBASH -n "$$F" ; ) ;; \
	        *"POSIX shell script"*|*"shell script"*) ( set -x ; /bin/sh -n "$$F" ; ) ;; \
	    esac || { RES=$$? ; echo "ERROR: Syntax check failed for script file: $$F" >&2 ; exit $$RES ; } ; \
	done
	@echo 'SUCCESS: Shell scripts syntax is acceptable, no fatal issues were found'

shellcheck-disclaimer:
	@echo "==============================================================================="
	@echo "NOTICE: 'make shellcheck' is currently an alias for 'make check-scripts-syntax'"
	@echo "Later it may become a call to the real shellcheck tool (if available on the"
	@echo "build system during the configure phase)"
	@echo "==============================================================================="

# Note: currently not part of shellcheck target, because the script below
# can test the logic with numerous SHELL_PROGS in a CI setting, and because
# check-scripts-syntax probably has checked the basic syntax above already.
shellcheck-nde:
	GREP="$(GREP)"; EGREP="$(EGREP)"; export GREP; export EGREP; \
	cd $(srcdir)/tests && SERVICE_FRAMEWORK="selftest" ./nut-driver-enumerator-test.sh

shellcheck: shellcheck-disclaimer check-scripts-syntax

CPPCHECK = @CPPCHECK@
if HAVE_CPPCHECK
cppcheck: cppcheck-cxx11.xml cppcheck-c99.xml

# Let the analysis get regenerated due to any change in source;
# but note that with our different make implementations to support,
# we can not either $(shell find ...) nor blindly say e.g. *.cpp
# for each FS structure layer because e.g. there are no ./*.cpp
# in the root dir of the codebase (and so make complains there is
# `No rule to make target `*.cpp', needed by `cppcheck-cxx11.xml'`)
#
# Note that the actual `cppcheck` scan finds all files it likes
# (so if CPPCHECK_SRC_* misses something, it just won't trigger
# automagically a rebuild of the XML in developer working cycles).
CPPCHECK_SRC_H = $(top_srcdir)/*/*.h $(top_srcdir)/*/*/*.h
# CPPCHECK_SRC_H += $(top_srcdir)/*.h

CPPCHECK_SRC_C = $(top_srcdir)/*/*.c $(top_srcdir)/*/*/*.c
# CPPCHECK_SRC_C += $(top_srcdir)/*.cpp

CPPCHECK_SRC_CXX = $(top_srcdir)/*/*.cpp
# CPPCHECK_SRC_CXX += $(top_srcdir)/*.cpp $(top_srcdir)/*/*/*.cpp

cppcheck-cxx11.xml: $(CPPCHECK_SRC_CXX) $(CPPCHECK_SRC_H)
	$(CPPCHECK) --std=c++11 --enable=all --inconclusive --xml --xml-version=2 . 2>$@

cppcheck-c99.xml: $(CPPCHECK_SRC_C) $(CPPCHECK_SRC_H)
	$(CPPCHECK) --std=c99 --enable=all --inconclusive --xml --xml-version=2 . 2>$@
else !HAVE_CPPCHECK
cppcheck:
	@echo "CPPCHECK analysis not available since 'cppcheck' was not found."
endif !HAVE_CPPCHECK

sockdebug:
	+cd $(builddir)/server && $(MAKE) $(AM_MAKEFLAGS) sockdebug$(EXEEXT)

# ----------------------------------------------------------------------
# Automatically generate the ChangeLog from Git logs:
MAINTAINERCLEANFILES += ChangeLog

# CI builds can leave a log of selected features:
MAINTAINERCLEANFILES += config.nut_report_feature.log*

# Older boundary of the ChangeLog commits range
# It can be a tag ('v2.2.0'), a commit hash, a date, ...
# See gitrevisions for more information on specifying ranges
#GITLOG_START_POINT=v2.6.0
#GITLOG_END_POINT=HEAD
GITLOG_START_POINT=@GITLOG_START_POINT@
GITLOG_END_POINT=@GITLOG_END_POINT@

# Force ChangeLog regeneration upon make dist (due to nonexistant 'dummy-stamp'),
# in case it has already been generated previously
# Note that the script is hard-coded to inspect Git workspace which contains
# the current dir, and defaults to generate a "ChangeLog" in the current dir.
# The script itself is generated from a template, so resides in builddir.
dummy-stamp:
ChangeLog: dummy-stamp
	+@$(MAKE) $(AM_MAKEFLAGS) $(abs_top_builddir)/ChangeLog

if WITH_PDF_NONASCII_TITLES
WITH_PDF_NONASCII_TITLES_ENVVAR = WITH_PDF_NONASCII_TITLES=yes
else !WITH_PDF_NONASCII_TITLES
WITH_PDF_NONASCII_TITLES_ENVVAR = WITH_PDF_NONASCII_TITLES=no
endif !WITH_PDF_NONASCII_TITLES

# Be sure to not confuse with a DIST'ed file (and so try to overwrite it);
# do however avoid re-generating it if already made on a previous pass and
# the Git HEAD pointer (branch) or its actual "index" or "object" database
# did not change since then - meaning the local developer or CI did not
# modify the metadata (subsequent generation of the huge PDF/HTML files
# can cost dearly).
# Note there's a bit more fuss about Git internals which NUT should not
# really care about encapsulation-wise (detection of NUT_GITDIR location
# which may reside elsewhere, e.g. with local repo clones with reference
# repo configuration, or submodules). But this is a Git-crawling target
# anyway, and in the worst case (Git's design changes) we would spend a
# bit of time researching the FS in vain, and go on to re-generate the
# ChangeLog when maybe we should not have - oh well.
# WARNING: The CHANGELOG_REQUIRE_GROUP_BY_DATE_AUTHOR=true mode here is
# default to allow for prettier documentation, but it can require too much
# memory for weaker build systems. Set it to false when calling make there.
CHANGELOG_REQUIRE_GROUP_BY_DATE_AUTHOR_ENVVAR = true
$(abs_top_builddir)/ChangeLog: tools/gitlog2changelog.py dummy-stamp
	@cd $(abs_top_srcdir) && \
	    if ( test -e .git ) 2>/dev/null || test -d .git || test -f .git || test -h .git ; then \
	        NUT_GITDIR=".git" ; if test -r "$${NUT_GITDIR}" -a ! -d "$${NUT_GITDIR}" ; then GD="`$(EGREP) '^gitdir:' "$${NUT_GITDIR}" | sed 's/^gitdir: *//'`" && test -n "$$GD" -a -d "$$GD" && NUT_GITDIR="$$GD" ; fi ; \
	        if test -s "$@" -a -d "$${NUT_GITDIR}" && test -z "`find "$${NUT_GITDIR}" -newer "$@" 2>/dev/null`" ; then \
	            echo "  DOC-CHANGELOG-GENERATE	$@ : SKIP (keep existing)" ; \
	            echo "Using still-valid ChangeLog file generated earlier from same revision of Git source metadata in '$${NUT_GITDIR}'" >&2 ; \
	        else \
	            if test -s "$@" ; then \
	                echo "  DOC-CHANGELOG-GENERATE	$@ : RE-GENERATE (older than Git workspace metadata) ..." ; \
	            else \
	                echo "  DOC-CHANGELOG-GENERATE	$@ : GENERATE (currently absent) ..." ; \
	            fi ; \
	            CHANGELOG_FILE="$@" $(WITH_PDF_NONASCII_TITLES_ENVVAR) \
	            CHANGELOG_REQUIRE_GROUP_BY_DATE_AUTHOR="$(CHANGELOG_REQUIRE_GROUP_BY_DATE_AUTHOR_ENVVAR)" \
	              $(abs_top_builddir)/tools/gitlog2changelog.py $(GITLOG_START_POINT) $(GITLOG_END_POINT) \
	              && { echo "  DOC-CHANGELOG-GENERATE	$@ : SUCCESS"; } \
	              || { \
	                echo "  DOC-CHANGELOG-GENERATE	$@ : FAILED (non-fatal)" >&2 ; \
	                printf "gitlog2changelog.py failed to generate the ChangeLog.\n\nNOTE: See https://github.com/networkupstools/nut/commits/master for change history.\n\n" > "$@" ; \
	            } ; \
	        fi ; \
	    else \
	        if test x"$(abs_top_srcdir)" != x"$(abs_top_builddir)" -a -s ./ChangeLog ; then \
	            echo "  DOC-CHANGELOG-GENERATE	$@ : SKIP (keep existing)" ; \
	            if diff ./ChangeLog "$@" >/dev/null 2>/dev/null ; then \
	                echo "Using distributed ChangeLog file from sources (and builddir already has content identical to one in srcdir)" >&2 ; \
	            else \
	                echo "Using distributed ChangeLog file from sources (and builddir is not srcdir)" >&2 ; \
	                rm -f "$@" || true ; \
	                cp -pf ./ChangeLog "$@" || { cat ./ChangeLog > "$@" ; touch -r ./ChangeLog "$@" || true ; } ; \
	            fi ; \
	        else \
	            if test -s "$@" ; then \
	                echo "  DOC-CHANGELOG-GENERATE	$@ : SKIP (keep existing)" ; \
	                echo "Using distributed ChangeLog file from sources (and builddir is srcdir)" >&2 ; \
	            else \
	                echo "  DOC-CHANGELOG-GENERATE	$@ : FAILED (non-fatal)" >&2 ; \
	                printf "Failed to generate the ChangeLog.\n\nNOTE: See https://github.com/networkupstools/nut/commits/master for change history.\n\n" > "$@" ; \
	            fi ; \
	        fi ; \
	    fi

ChangeLog.adoc: ChangeLog
	+cd $(abs_top_builddir)/docs && $(MAKE) $(AM_MAKEFLAGS) ../ChangeLog.adoc

nut_version.h include/nut_version.h:
	+cd $(abs_top_builddir)/include && $(MAKE) $(AM_MAKEFLAGS) nut_version.h

# May involve (re-)build of libupsclient.la
libupsclient-version.h clients/libupsclient-version.h:
	+cd $(abs_top_builddir)/include && $(MAKE) $(AM_MAKEFLAGS) libupsclient-version.h

tools/gitlog2changelog.py: tools/gitlog2changelog.py.in
	+cd $(@D) && $(MAKE) $(AM_MAKEFLAGS) -s $(@F)

# ----------------------------------------------------------------------
# Maintainers targets: distribution signature and hashes
# Assume tools are available (and maintainer GPG keys)
dist-files: dist dist-sig dist-hash

nut-@PACKAGE_VERSION@.tar.gz: dist
nut-@PACKAGE_VERSION@.tar.gz.sig: dist-sig
nut-@PACKAGE_VERSION@.tar.gz.md5 nut-@PACKAGE_VERSION@.tar.gz.sha256: dist-hash

dist-sig: nut-@PACKAGE_VERSION@.tar.gz
	rm -f nut-@PACKAGE_VERSION@.tar.gz.sig
	gpg --detach-sign nut-@PACKAGE_VERSION@.tar.gz

dist-hash: nut-@PACKAGE_VERSION@.tar.gz
	md5sum nut-@PACKAGE_VERSION@.tar.gz > nut-@PACKAGE_VERSION@.tar.gz.md5
	sha256sum nut-@PACKAGE_VERSION@.tar.gz > nut-@PACKAGE_VERSION@.tar.gz.sha256

# ----------------------------------------------------------------------
# targets from old build system (pre-automake).
# supported for a period of time for backward "compatibility".

WARN="----------------------------------------------------------------------"

build:
	@echo $(WARN)
	@echo "Warning: 'make build' is deprecated. Use 'make all' instead."
	@echo $(WARN)
	+$(MAKE) $(AM_MAKEFLAGS) all
install-bin:
	@echo $(WARN)
	@echo "Warning: 'make install-bin' is deprecated." 
	@echo "Use 'make install-exec' instead for a similar effect."
	@echo $(WARN)
	+cd common;  $(MAKE) $(AM_MAKEFLAGS) install
	+cd drivers; $(MAKE) $(AM_MAKEFLAGS) install
	+cd server;  $(MAKE) $(AM_MAKEFLAGS) install
	+cd clients; $(MAKE) $(AM_MAKEFLAGS) install
install-man: install-data-recursive
	@echo $(WARN)
	@echo "Warning: 'make install-man' is deprecated."
	@echo "Use 'cd docs/man; make install' instead."
	@echo $(WARN)
	+cd docs/man; $(MAKE) $(AM_MAKEFLAGS) install
install-conf:
	@echo $(WARN)
	@echo "Warning: 'make install-conf' is deprecated."
	@echo "Use 'cd conf; make install' instead."
	@echo $(WARN)
	+cd conf; $(MAKE) $(AM_MAKEFLAGS) install
# The target install-data already has a standardized meaning under automake
install-dirs:
	@echo $(WARN)
	@echo "Warning: 'make install-dirs' is deprecated."
	@echo "Use 'make installdirs' instead."
	@echo $(WARN)
	+$(MAKE) $(AM_MAKEFLAGS) installdirs
cgi build-cgi install-cgi install-cgi-dir install-cgi-bin \
install-cgi-man install-cgi-conf install-cgi-html: 
	@echo "Error: 'make $@' no longer exists."
	@echo "Use './configure --with-cgi' instead."
install-lib:
	@echo "Error: 'make $@' no longer exists."
	@echo "Use './configure --with-dev' instead."
usb build-usb install-usb:
	@echo "Error: 'make $@' no longer exists."
	@echo "Use './configure --with-usb' instead."
snmp build-snmp install-snmp install-snmp-mgr install-snmp-man: 
	@echo "Error: 'make $@' no longer exists."
	@echo "Use './configure --with-snmp' instead."
setver:
	@echo "Error: 'make setver' no longer exists."
	@echo "Edit configure.ac to set version number."

# Adjust permissions when installing as `root` into the actual system.
# We honour DESTDIR anyway, as someone can install into a chroot etc.
# NOTE: Might be an 'install-data-hook' (for dirs) and/or 'install-exec-hook'
# (for service restart) but better not force this on everyone?
# It is also up to the end-user making such an installation to remove (or not)
# dirs and files made below.
# To err on the safe side in cross builds, we ignore Windows builds and those
# not built for the same system as the build host.
install-data-hook:
	@case "@target_os@" in *mingw*) exit 0;; esac ; \
	 if [ x"@host_os@" != x"@build_os@" ]; then exit 0 ; fi ; \
	 if [ x"@target_os@" != x"@build_os@" ]; then exit 0 ; fi ; \
	 if (command -v id) && ( [ x"`id -u 2>/dev/null`" = x0 ] || [ x"`id | sed -e 's,(.*$$,,' -e 's,^.*uid=,,'`" = x0 ] ) && [ x"$(DESTDIR)" = x -o x"$(DESTDIR)" = x/ ] ; then \
		echo "================================================================================" >&2 ; \
		echo "| NUT data files have been installed into the system, now consider running     |" >&2 ; \
		echo "| '(sudo) make install-as-root' to apply permissions and service state changes |" >&2 ; \
		echo "================================================================================" >&2 ; \
	 fi

if HAVE_SYSTEMD
HAVE_SYSTEMD = true
else !HAVE_SYSTEMD
HAVE_SYSTEMD = false
endif !HAVE_SYSTEMD

if WITH_SYSTEMD_TMPFILES
WITH_SYSTEMD_TMPFILES = true
else !WITH_SYSTEMD_TMPFILES
WITH_SYSTEMD_TMPFILES = false
endif !WITH_SYSTEMD_TMPFILES

if WITH_SYSTEMD_PRESET
WITH_SYSTEMD_PRESET = true
else !WITH_SYSTEMD_PRESET
WITH_SYSTEMD_PRESET = false
endif !WITH_SYSTEMD_PRESET

if WITH_CGI
WITH_CGI = true
else !WITH_CGI
WITH_CGI = false
endif !WITH_CGI

if WITH_SOLARIS_SMF
WITH_SOLARIS_SMF = true
else !WITH_SOLARIS_SMF
WITH_SOLARIS_SMF = false
endif !WITH_SOLARIS_SMF

if WITH_SOLARIS_INIT
WITH_SOLARIS_INIT = true
else !WITH_SOLARIS_INIT
WITH_SOLARIS_INIT = false
endif !WITH_SOLARIS_INIT

# TODO: Actually move this into scripts like Solaris/postinstall
# using OS-specific `useradd`/`groupadd`, etc.
# Note that as we stop services, we may be dealing with (older)
# distros that do not follow current naming in NUT code base.
install-as-root:
	@+echo "$@: starting (no-op if not root)" >&2 ; \
	 case "$(target_os)" in *mingw*) echo "$@: SKIP: not supported for this target_os='$(target_os)'" >&2 ; exit 0;; esac ; \
	 if [ x"$(host_os)" != x"$(build_os)" ]; then echo "$@: SKIP: build_os='$(build_os)' is not host_os='$(host_os)'" >&2 ; exit 0 ; fi ; \
	 if [ x"$(target_os)" != x"$(build_os)" ]; then echo "$@: SKIP: build_os='$(build_os)' is not target_os='$(target_os)'" >&2 ; exit 0 ; fi ; \
	 if (command -v id) && ( [ x"`id -u 2>/dev/null`" = x0 ] || [ x"`id | sed -e 's,(.*$$,,' -e 's,^.*uid=,,'`" = x0 ] ) ; then \
		echo "$@: we seem to be root, PROCEEDING" >&2 ; \
	 else \
		echo "$@: SKIP: we seem to NOT be root" >&2 ; \
		exit 0 ; \
	 fi ; \
	 prefix="$(prefix)"; \
	 if [ x"$(DESTDIR)" = x -o x"$(DESTDIR)" = x/ ] ; then \
		if $(HAVE_SYSTEMD) ; then \
			echo "$@: Stop NUT services, if any" >&2 ; \
			$(SYSTEMD_SYSTEMCTL_PROGRAM) stop nut-monitor.service nut-server.service || true ; \
			$(SYSTEMD_SYSTEMCTL_PROGRAM) stop nut-driver.service || true ; \
			$(SYSTEMD_SYSTEMCTL_PROGRAM) stop nut-driver.target || true ; \
			$(SYSTEMD_SYSTEMCTL_PROGRAM) stop nut-udev-settle.service || true ; \
			$(SYSTEMD_SYSTEMCTL_PROGRAM) stop nut.target || true ; \
		fi ; \
		if $(WITH_SOLARIS_SMF) || $(WITH_SOLARIS_INIT) ; then \
			if $(WITH_SOLARIS_SMF) ; then \
				echo "$@: Stop NUT services, if any" >&2 ; \
				SMF_ACTIVE="`/usr/bin/svcs -a -Hostate,fmri | grep svc:/system/power/ | grep -v disabled | awk '{print $$2}'`" ; \
				for S in $$SMF_ACTIVE ; do \
					/usr/sbin/svcadm disable -ts $$S || true ; \
				done ; \
			fi ; \
			$(top_builddir)/scripts/Solaris/preremove \
			|| exit ; \
		fi ; \
	 fi ; \
	 $(MAKE) $(AM_FLAGS) DESTDIR="$(DESTDIR)" install || exit ; \
	 if [ x"$(DESTDIR)" = x -o x"$(DESTDIR)" = x/ ] ; then \
		if $(WITH_SOLARIS_SMF) || $(WITH_SOLARIS_INIT) ; then \
			$(top_builddir)/scripts/Solaris/preinstall && \
			$(top_builddir)/scripts/Solaris/postinstall ; \
			exit ; \
		fi ; \
	 fi ; \
	 echo "  MKDIR	$(DESTDIR)/$(STATEPATH) $(DESTDIR)/$(STATEPATH)/upssched" >&2 ; \
	 $(MKDIR_P) "$(DESTDIR)/$(STATEPATH)/upssched" && \
	 for D in "$(PIDPATH)" "$(ALTPIDPATH)" "$(ALTSTATEPATH)" "$(CONFPATH)" ; do \
		case x"$$D" in \
		x|x@*) ;; \
		*)	echo "  MKDIR	$(DESTDIR)/$$D" >&2 ; \
			$(MKDIR_P) "$(DESTDIR)/$$D" \
			|| exit ;; \
		esac ; \
	 done ; \
	 if (command -v chmod) ; then \
		echo "  CHMOD(0770)	$(DESTDIR)/$(STATEPATH)/upssched" >&2 ; \
		chmod 0770 "$(DESTDIR)/$(STATEPATH)/upssched" \
		|| exit ; \
		for D in "$(STATEPATH)" "$(PIDPATH)" "$(ALTPIDPATH)" "$(ALTSTATEPATH)" ; do \
			case x"$$D" in \
			x|x@*|x/run|x/var/run|x/tmp|x/var/tmp|x/dev/shm|x/etc|x/var|x/usr|x/usr/local|x/usr/local/etc|x/usr/etc) ;; \
			*)	echo "  CHMOD(0770)	$(DESTDIR)/$$D" >&2 ; \
				chmod 0770 "$(DESTDIR)/$$D" \
				|| exit ;; \
			esac ; \
		done ; \
		case x"$(CONFPATH)" in \
			x|x@*|x/run|x/var/run|x/tmp|x/var/tmp|x/dev/shm|x/etc|x/var|x/usr|x/usr/local|x/usr/local/etc|x/usr/etc) ;; \
			*)	echo "  CHMOD(0751)	$(DESTDIR)/$(CONFPATH)" >&2 ; \
				chmod 0751 "$(DESTDIR)/$(CONFPATH)" \
				|| exit ;; \
		esac ; \
		for F in hosts.conf.sample upsstats-single.html.sample upsstats.html.sample upsset.conf.sample ; do \
			echo "  CHMOD(0644)	CGI: $(DESTDIR)/$(CONFPATH_EXAMPLES)/$$F" >&2 ; \
			chmod 0644 "$(DESTDIR)/$(CONFPATH_EXAMPLES)/$$F" \
			|| { if $(WITH_CGI) ; then exit 1 ; else true ; fi ; } ; \
		done ; \
		for F in nut.conf.sample ups.conf.sample upsd.conf.sample upsd.users.sample upsmon.conf.sample upssched.conf.sample ; do \
			echo "  CHMOD(0640)	$(DESTDIR)/$(CONFPATH_EXAMPLES)/$$F" >&2 ; \
			chmod 0640 "$(DESTDIR)/$(CONFPATH_EXAMPLES)/$$F" \
			|| exit ; \
		done ; \
	 else \
		echo "$@: WARNING: Can not CHMOD created locations!" >&2 ; \
	 fi ; \
	 if (command -v chown) && ( test 0 -lt "`id -u '$(RUN_AS_USER)' 2>/dev/null`" || test 0 -lt "`id '$(RUN_AS_USER)' | sed -e 's,(.*$$,,' -e 's,^.*uid=,,'`" ] ) \
	 && ( test 0 -lt "`getent group '$(RUN_AS_GROUP)' | awk -F: '{print $$3}'`" || test 0 -lt "`id -g '$(RUN_AS_GROUP)'`" ) \
	 ; then \
		echo "  CHOWN($(RUN_AS_USER):$(RUN_AS_GROUP))	$(DESTDIR)/$(STATEPATH)/upssched" >&2 ; \
		chown "$(RUN_AS_USER):$(RUN_AS_GROUP)" "$(DESTDIR)/$(STATEPATH)/upssched" \
		|| exit ; \
		for D in "$(STATEPATH)" "$(PIDPATH)" "$(ALTPIDPATH)" "$(ALTSTATEPATH)" ; do \
			case x"$$D" in \
			x|x@*|x/run|x/var/run|x/tmp|x/var/tmp|x/dev/shm|x/etc|x/var|x/usr|x/usr/local|x/usr/local/etc|x/usr/etc) ;; \
			*)	echo "  CHOWN($(RUN_AS_USER):$(RUN_AS_GROUP))	$(DESTDIR)/$$D" >&2 ; \
				chown "$(RUN_AS_USER):$(RUN_AS_GROUP)" "$(DESTDIR)/$$D" \
				|| exit ;; \
			esac ; \
		done ; \
		case x"$(CONFPATH)" in \
			x|x@*|x/run|x/var/run|x/tmp|x/var/tmp|x/dev/shm|x/etc|x/var|x/usr|x/usr/local|x/usr/local/etc|x/usr/etc) ;; \
			*)	echo "  CHOWN(root:$(RUN_AS_GROUP))	$(DESTDIR)/$(CONFPATH)" >&2 ; \
				chown "root:$(RUN_AS_GROUP)" "$(DESTDIR)/$(CONFPATH)" \
				|| exit ;; \
		esac ; \
		for F in hosts.conf.sample upsstats-single.html.sample upsstats.html.sample upsset.conf.sample ; do \
			echo "  CHOWN(root:$(RUN_AS_GROUP))	CGI: $(DESTDIR)/$(CONFPATH_EXAMPLES)/$$F" >&2 ; \
			chown "root:$(RUN_AS_GROUP)" "$(DESTDIR)/$(CONFPATH_EXAMPLES)/$$F" \
			|| { if $(WITH_CGI) ; then exit 1 ; else true ; fi ; } ; \
		done ; \
		for F in nut.conf.sample ups.conf.sample upsd.conf.sample upsd.users.sample upsmon.conf.sample upssched.conf.sample ; do \
			echo "  CHOWN(root:$(RUN_AS_GROUP))	$(DESTDIR)/$(CONFPATH_EXAMPLES)/$$F" >&2 ; \
			chown "root:$(RUN_AS_GROUP)" "$(DESTDIR)/$(CONFPATH_EXAMPLES)/$$F" \
			|| exit ; \
		done ; \
	 else \
		echo "$@: WARNING: Can not CHOWN created locations!" >&2 ; \
	 fi ; \
	 if [ x"$(DESTDIR)" = x -o x"$(DESTDIR)" = x/ ] ; then \
		applied_udev=false ; \
		if $(HAVE_SYSTEMD) ; then \
			echo "$@: Activate default systemd layout, restart services:" >&2 ; \
			if $(WITH_SYSTEMD_TMPFILES) ; then \
				echo "$@: Apply systemd-tmpfiles presets" >&2 ; \
				$(SYSTEMD_TMPFILES_PROGRAM) --create || exit ; \
			fi ; \
			echo "$@: Learn systemd definition changes" >&2 ; \
			$(SYSTEMD_SYSTEMCTL_PROGRAM) daemon-reload || exit ; \
			APPLIED_SYSTEMD_PRESET=false ; \
			if $(WITH_SYSTEMD_PRESET) ; then \
				echo "$@: Apply systemd enabled/disabled service presets" >&2 ; \
				$(SYSTEMD_SYSTEMCTL_PROGRAM) preset-all && APPLIED_SYSTEMD_PRESET=true || APPLIED_SYSTEMD_PRESET=false ; \
			fi ; \
			if [ x"$${APPLIED_SYSTEMD_PRESET}" = x"false" ] ; then \
				echo "$@: Apply systemd enabled/disabled service defaults in a legacy manner" >&2 ; \
				$(SYSTEMD_SYSTEMCTL_PROGRAM) disable nut.target nut-driver.target nut-udev-settle.service nut-monitor nut-server nut-driver-enumerator.path nut-driver-enumerator.service || exit ; \
				$(SYSTEMD_SYSTEMCTL_PROGRAM) enable  nut.target nut-driver.target nut-udev-settle.service nut-monitor nut-server nut-driver-enumerator.path nut-driver-enumerator.service || exit ; \
			fi ; \
			$(SYSTEMD_SYSTEMCTL_PROGRAM) restart udev && applied_udev=true || true ; \
			if [ -s '$(CONFPATH)/ups.conf' ] ; then \
				echo "$@: Reconfigure nut-driver-enumerator (service instance wrapping)" >&2 ; \
				$(top_builddir)/scripts/upsdrvsvcctl/nut-driver-enumerator.sh --reconfigure || { RES=$$?; if [ $$RES != 42 ] ; then exit $$RES ; fi ; } ; \
			fi; \
			echo "$@: Restart NUT services" >&2 ; \
			$(SYSTEMD_SYSTEMCTL_PROGRAM) restart nut-driver-enumerator.service nut-monitor.service nut-server.service \
			|| if [ -s '$(CONFPATH)/ups.conf' -a -s '$(CONFPATH)/upsd.conf' -a -s '$(CONFPATH)/upsd.users' -a -s '$(CONFPATH)/upsmon.conf' ] ; then exit 1 ; \
			else echo "$@: some configs are missing, assuming new NUT installation" >&2; fi; \
		fi ; \
		if $${applied_udev} && (command -v udevadm); then \
			true ; \
		else \
			udevadm control --reload-rules && udevadm trigger && applied_udev=true || true ; \
		fi ; \
	 fi ; \
	 echo "$@: Finished SUCCESSFULLY" >&2

# Clean the dist tarball and packages
MAINTAINERCLEANFILES_DISTBALL = nut-*.tar.gz
# HP-UX:
MAINTAINERCLEANFILES_PACKAGES = NUT_HPUX_package$(PACKAGE_VERSION).depot NUT_HPUX_package-$(PACKAGE_VERSION).depot
# AIX as below, and RedHat-compatible (cover binary and source packages):
MAINTAINERCLEANFILES_PACKAGES += nut*rpm
# Debian-compatible (cover binary and source packages):
MAINTAINERCLEANFILES_PACKAGES += nut*deb
# Solaris SVR4 package archives:
MAINTAINERCLEANFILES_PACKAGES += NUT_solaris_*_package$(PACKAGE_VERSION).local.gz NUT_solaris_*_package-$(PACKAGE_VERSION).local.gz
# Newer Solaris IPS (aka "pkg(5)" format archives)
MAINTAINERCLEANFILES_PACKAGES += *.p5p

MAINTAINERCLEANFILES += $(MAINTAINERCLEANFILES_DISTBALL)
MAINTAINERCLEANFILES += $(MAINTAINERCLEANFILES_PACKAGES)

package: dist
	+DESTDIR="$(abs_builddir)/_install_pkgprotodir" ; export DESTDIR; \
	rm -rf "$$DESTDIR"; \
	case "`uname -s`" in \
	"HP-UX") \
		( cd scripts/HP-UX && \
		  $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" package && \
		  mv NUT_HPUX_package.depot $(abs_top_builddir)/NUT_HPUX_package-$(PACKAGE_VERSION).depot ) ;; \
	"SunOS") \
		$(MAKE) $(AM_MAKEFLAGS) && \
		$(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" install && \
		( cd scripts/Solaris && \
		  $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" package ) && \
		$(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" uninstall && \
		rm -rf "$$DESTDIR" || \
		{ echo "FAILED to produce SunOS packages, inspect '$$DESTDIR' for clues" >&2 ; exit 1; } ;; \
	"AIX") \
		if test -d /usr/src/packages/SPECS -a -w /usr/src/packages/SPECS ; then : ; else echo "Can not write to /usr/src/packages/SPECS" >&2 ; exit 1; fi ; \
		if test -d /usr/src/packages/SOURCES -a -w /usr/src/packages/SOURCES ; then : ; else echo "Can not write to /usr/src/packages/SOURCES" >&2 ; exit 1; fi ; \
		$(MAKE) $(AM_MAKEFLAGS) dist && \
		cp scripts/Aix/nut-aix.spec /usr/src/packages/SPECS && \
		cp scripts/Aix/nut.init nut-$(PACKAGE_VERSION).tar.gz /usr/src/packages/SOURCES && \
		rpm -ba /usr/src/packages/SPECS/nut-aix.spec && \
		mv /usr/src/packages/RPMS/nut*rpm $(abs_top_builddir)/ ;; \
	*)	echo "Unsupported OS for 'make $@' (no recipe bound)" >&2; exit 1;; \
	esac

if HAVE_WINDOWS
# Steam-roll over all executables/libs we have placed in DESTDIR and copy over
# any resolved dependencies from the cross-build (or native MSYS2) environment.
# Then hardlink libraries for sbin... (alternative: all bins in one dir)
# TOTHINK: Are there more dirs to consider? So far we cover bindir, sbindir and
# driverexecdir (e.g. some Linux distros place drivers to /lib/nut while tools
# and daemons are in /usr/bin and /usr/sbin), and cgiexecdir, and occasional
# helpers like "sockdebug.exe" in libexecdir; anything else?..
# Note we hold existance of cgiexecdir as optional, but the name is expected to
# be defined. Other dirs are "just assumed" to exist (that we are not packaging
# some NUT build without drivers/tools/daemons). Subject to change if needed.
# Currently this is handled by a CHECKING... step that should fail if it hits
# anything.
install-win-bundle: all
	@if test -z "$(DESTDIR)" ; then echo "ERROR: '$@': Bundle may only be installed to some DESTDIR prototype area'" >&2 ; exit 1; fi
	+$(MAKE) $(AM_MAKEFLAGS) DESTDIR='$(DESTDIR)' install
	+$(MAKE) $(AM_MAKEFLAGS) DESTDIR='$(DESTDIR)' install-win-bundle-thirdparty

install-win-bundle-thirdparty:
	@if test -z "$(DESTDIR)" ; then echo "ERROR: '$@': Bundle may only be installed to some DESTDIR prototype area'" >&2 ; exit 1; fi
	@echo "Searching which DLLs need to be bundled with NUT for Windows..." >&2
	@if test -z "$$ARCH" ; then \
	    if test -n "$(target)" ; then \
	        ARCH='$(target)' \
	    ; else \
	        if test -n "$(target_triplet)" ; then ARCH='$(target_triplet)' ; fi ; \
	    fi ; \
	 fi ; \
	 if test -n "$$ARCH" ; then export ARCH ; fi ; \
	 DESTDIR='$(DESTDIR)' ; export DESTDIR ; \
	 (  cd '$(DESTDIR)' || exit ; \
	    DESTDIR="" '$(abs_top_srcdir)/scripts/Windows/dllldd.sh' dllldddir . \
	    | while read D ; do \
	        echo "   DLL->bin       $$D" 2>&1 ; \
	        cp -pf "$$D" './$(bindir)/' ; \
	    done ; \
	 ) || exit ; \
	 (  if test x"$(bindir)" = x"$(sbindir)" ; then exit 0 ; fi ; \
	    cd '$(DESTDIR)/$(sbindir)' || exit ; \
	    '$(abs_top_srcdir)/scripts/Windows/dllldd.sh' dllldddir . \
	    | while read D ; do \
	        echo "   DLL->sbin      $$D" 2>&1 ; \
	        ln -f '$(DESTDIR)/$(bindir)'/"`basename "$$D"`" ./ ; \
	    done ; \
	 ) || exit ; \
	 (  if test x"$(driverexecdir)" = x"$(bindir)" ; then exit 0 ; fi ; \
	    if test x"$(driverexecdir)" = x"$(sbindir)" ; then exit 0 ; fi ; \
	    cd '$(DESTDIR)/$(driverexecdir)' || exit ; \
	    '$(abs_top_srcdir)/scripts/Windows/dllldd.sh' dllldddir . \
	    | while read D ; do \
	        echo "   DLL->drv       $$D" 2>&1 ; \
	        ln -f '$(DESTDIR)/$(bindir)'/"`basename "$$D"`" ./ ; \
	    done ; \
	 ) || exit ; \
	 (  if test -z "$(cgiexecdir)" -o ! -d "$(DESTDIR)/$(cgiexecdir)" ; then exit 0 ; fi ; \
	    if test x"$(cgiexecdir)" = x"$(bindir)" ; then exit 0 ; fi ; \
	    if test x"$(cgiexecdir)" = x"$(sbindir)" ; then exit 0 ; fi ; \
	    if test x"$(driverexecdir)" = x"$(cgiexecdir)" ; then exit 0 ; fi ; \
	    cd '$(DESTDIR)/$(cgiexecdir)' || exit ; \
	    '$(abs_top_srcdir)/scripts/Windows/dllldd.sh' dllldddir . \
	    | while read D ; do \
	        echo "   DLL->cgi       $$D" 2>&1 ; \
	        ln -f '$(DESTDIR)/$(bindir)'/"`basename "$$D"`" ./ ; \
	    done ; \
	 ) || exit ; \
	 (  if test x"$(libexecdir)" = x"$(bindir)" ; then exit 0 ; fi ; \
	    if test x"$(libexecdir)" = x"$(sbindir)" ; then exit 0 ; fi ; \
	    if test x"$(libexecdir)" = x"$(driverexecdir)" ; then exit 0 ; fi ; \
	    if test x"$(libexecdir)" = x"$(cgiexecdir)" ; then exit 0 ; fi ; \
	    cd '$(DESTDIR)/$(libexecdir)' || exit ; \
	    '$(abs_top_srcdir)/scripts/Windows/dllldd.sh' dllldddir . \
	    | while read D ; do \
	        echo "   DLL->libexec   $$D" 2>&1 ; \
	        ln -f '$(DESTDIR)/$(bindir)'/"`basename "$$D"`" ./ ; \
	    done ; \
	 ) || exit
	@echo "CHECKING if any executable files were installed to locations other than those covered by this recipe, so might not have needed DLLs bundled near them" >&2 ; \
	 relbindir="`echo './$(bindir)/' | sed 's,//*,/,g'`" ; \
	 relsbindir="`echo './$(sbindir)/' | sed 's,//*,/,g'`" ; \
	 reldriverexecdir="`echo './$(driverexecdir)/' | sed 's,//*,/,g'`" ; \
	 relcgiexecdir="`echo './$(cgiexecdir)/' | sed 's,//*,/,g'`" ; \
	 rellibexecdir="`echo './$(libexecdir)/' | sed 's,//*,/,g'`" ; \
	 cd '$(DESTDIR)' || exit ; \
	 find . -type f | $(EGREP) -i '\.(exe|dll)$$' \
	 | $(EGREP) -v "^($${relbindir}|$${relsbindir}|$${reldriverexecdir}|$${relcgiexecdir}|$${rellibexecdir})" \
	 | ( RES=0 ; while IFS= read LINE ; do echo "$$LINE" ; RES=1; done; exit $$RES )

else !HAVE_WINDOWS
install-win-bundle:
	@echo "  SKIP	'$@' : not enabled for current build configuration"

install-win-bundle-thirdparty:
	@echo "  SKIP	'$@' : not enabled for current build configuration"
endif !HAVE_WINDOWS

print-MAINTAINERCLEANFILES print-REALCLEANFILES:
	@echo $(MAINTAINERCLEANFILES)

print-DISTCLEANFILES:
	@echo $(DISTCLEANFILES)

# TODO: Recursive mode to consider patterns defined in sub-dir makefiles
git-realclean-check:
	@if ( ( test -e .git ) 2>/dev/null || test -d .git || test -f .git || test -h .git ) && (command -v git); then \
		git status --ignored || while read F ; do \
			for P in $(MAINTAINERCLEANFILES) ; do \
				case "$$F" in \
				*/$$P) exit 1 ;; \
				esac ; \
			done; \
		done ; \
	 fi

# Simply group recipes which depend on a ton of source files but are generally
# quickly handled by external tools, to group (in life and log) various checks
# separately from the probably slower/louder stages for test programs like
# check-NIT:
CHECK_FILES_QUICK_TARGETS = check-man
if WITH_SPELLCHECK
CHECK_FILES_QUICK_TARGETS += spellcheck-quick
endif WITH_SPELLCHECK
check-files-quick: $(CHECK_FILES_QUICK_TARGETS)

# Autotools hook: run the quick checks before recursing for defaults:
check-recursive: check-files-quick

# Caller can set this to "false" to not regenerate below
# (e.g. in CI vs. developer iterations):
CHECK_PARALLEL_BUILDS_REGEN = true

# Not pulled in directly so far, can be used by developers to verify that build
# rules (inlcuding dependencies pulled from other directories) make sense and
# do not cause conflict by writing into same file names. Something that builds
# from root directory arrange nicely, but needs careful balancing on a tightrope
# if developers build pieces of code right in the directory of their interest.
# It is recommended to have "ccache" (or similar) setup working, to minimize the
# time cost and workload of compilations involved in these looped build retries.
# Oddly, the NetBSD 9.2 `bmake` faced with out-of-tree (subdir) builds does
# find itself work to do even if called in the root dir (with no `Makefile`
# generated there -- it detects a build to do under e.g. `obj/` in CI tests),
# but also tends to have that directory as current at the time we try to call
# the `./config.status` line -- and fails there. Hence the `cd top_builddir`.
# Auto-parallel recipe (if current 'make' implementation supports the "-j N"
# syntax; the optional MAXPARMAKES may be set in NUT CI farm style builds):
check-parallel-builds:
	if [ x"$(CHECK_PARALLEL_BUILDS_REGEN)" = xtrue ] ; then cd '$(top_srcdir)' && $(AUTOMAKE) -f ; fi
	if [ x"$(CHECK_PARALLEL_BUILDS_REGEN)" = xtrue ] ; then cd '$(top_builddir)' && ./config.status ; fi
	+@$(SET_PARMAKES_OPT); \
	  DIRS=""; \
	  cd '$(abs_top_builddir)' || exit ; \
	  $(MAKE) $(AM_MAKEFLAGS) -k -s $${PARMAKES_OPT} clean || { RES=$$?; echo "$@: FAILED: make pre-clean before checking subdirs for sources" >&2; exit $$RES; } ; \
	  for D in `cd '$(top_srcdir)' && find . -name '*.c' -o -name '*.cpp' | sed 's,/[^/]*\.cp*$$,,' | uniq` ; do \
		( ( [ -e "$(top_srcdir)/$$D/Makefile.am" ] ) 2>/dev/null || [ -f "$(top_srcdir)/$$D/Makefile.am" ] || [ -h "$(top_srcdir)/$$D/Makefile.am" ] ) && [ -s "$$D/Makefile" ] || continue ; \
		$(MAKE) $(AM_MAKEFLAGS) -k -s $${PARMAKES_OPT} clean || { RES=$$?; echo "$@: FAILED: make clean before going to $$D" >&2; exit $$RES; } ; \
		echo "  $@	in $${D}" ; \
		( cd "$$D" && $(MAKE) $(AM_MAKEFLAGS) -k -s $${PARMAKES_OPT} ) || { RES=$$?; echo "$@: FAILED: parallel make in $$D" >&2; \
		  echo "To investigate, try:  (MAKEFLAGS='$(MAKEFLAGS)' ; export MAKEFLAGS; $(MAKE) $(AM_MAKEFLAGS) $${PARMAKES_OPT} clean ; automake -f && ./config.status && clear && (cd $${D}/ && $(MAKE) $(AM_MAKEFLAGS) V=1 $${PARMAKES_OPT} 2>&1 ; echo $$?) | tee /tmp/make.log ; RES=$$? ; $(EGREP) '(\] Error|No rule to)' /tmp/make.log && less /tmp/make.log ; exit $$RES )"; \
		  echo "If builds were interrupted before, you may also have to re-initialize the build area completely, e.g.:  git clean -fdX ; ./ci_build.sh && $(MAKE) $(MAKEFLAGS) $(AM_MAKEFLAGS) $@" ; \
		  exit $$RES; } ; \
		DIRS="$${DIRS} $${D}" ; \
	  done ; \
	  echo "$@: SUCCESS in all checked directories:$${DIRS}" >&2