Support for Atmel Root/Signer modules

[cdurante]

Is it possible to get this application GUI to run using the generic Atmel Root/Signer modules?

http://www.atmel.com/tools/AT88CKECCROOT-SIGNER.aspx

I'm particularly interested in the ability to easily register a CA certificate from my signer module with AWS IoT. However, I've been looking for a client application that performs easy provisioning of new ECC508 devices on my own prototype. The Zero Touch board isn't really helpful because we are using the PIC32MZ platform.

Any suggestions?

[cdurante]

Anyone?

[schielimicrochip]

Hi Caleb, No, we do not have a GUI to use the AT88CKECCROOT-SIGNER dongles with AWS. The AWS Zero touch kit ships with dongles that are identical from a hardware viewpoint and interface with the provided GUI. At this point in time, the kit supports only ARM based MCUs that came to Microchip through the Atmel acquisition. Regards Nicolas From: Caleb Durante <notifications@github.com> Reply-To: MicrochipTech/AWS-Secure-Insight <reply@reply.github.com> Date: Wednesday, May 3, 2017 at 5:25 PM To: MicrochipTech/AWS-Secure-Insight <AWS-Secure-Insight@noreply.github.com> Cc: Subscribed <subscribed@noreply.github.com> Subject: [MicrochipTech/AWS-Secure-Insight] Support for Atmel Root/Signer modules (#9) Is it possible to get this application GUI to run using the generic Atmel Root/Signer modules? http://www.atmel.com/tools/AT88CKECCROOT-SIGNER.aspx I'm particularly interested in the ability to easily register a CA certificate from my signer module with AWS IoT. However, I've been looking for a client application that performs easy provisioning of new ECC508 devices on my own prototype. The Zero Touch board isn't really helpful because we are using the PIC32MZ platform. Any suggestions? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<#9>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ATsdh2bUAuurogp40H0V7C3fJJv-4shuks5r2RsWgaJpZM4NQG1C>.