This is Arduino code that read Temp/hum from Wio 3G
It use great device whitch is "Wio 3G"
and use BME280 Temp/Hum/Pre Sensor, Serial LED tape and MN5010HS GPS Mini Module
It require library,
- Wire.h
- ArduinoJson.h
- SSCI_BME280.h
- WioCellLibforArduino.h
- Adafruit_NeoPixel.h
Connect BME280 with I2C to Wio 3G I2C Groove port
Connect Serial LEB Tape to Wio 3G D38 Groove port
Connect MN5010HS GPS Mini Module to Wio 3G UART Groove port