Is there an existing issue for this problem?
CrealityPrint Version
7.0.0.4127
Operating System (OS)
Windows
OS Version
Windows 11
Additional system information
No response
Printer
K1
How to reproduce
Disable 'Purge in Prime Tower' in Printer settings. In Prepare import or create something that uses multifilament, go to Multifilament and change any setting. Slice the model and send to printer. After the first loop of the prime tower, the printer will crash with a 2571 error.
Tested on Creality K1 + CFS-C
Actual results
K1 crashes with 2571 error after first loop on layer 1 of the prime tower. The crash occurs as it's about to perform the infill on laywer 1
Expected results
Expected result is to print without error.
Cube_PLA_1h10m51s.zip
Project file & Debug log uploads
zip file containing the gcode that caused the error attached
Checklist of files to include
Anything else?
No response
Is there an existing issue for this problem?
CrealityPrint Version
7.0.0.4127
Operating System (OS)
Windows
OS Version
Windows 11
Additional system information
No response
Printer
K1
How to reproduce
Disable 'Purge in Prime Tower' in Printer settings. In Prepare import or create something that uses multifilament, go to Multifilament and change any setting. Slice the model and send to printer. After the first loop of the prime tower, the printer will crash with a 2571 error.
Tested on Creality K1 + CFS-C
Actual results
K1 crashes with 2571 error after first loop on layer 1 of the prime tower. The crash occurs as it's about to perform the infill on laywer 1
Expected results
Expected result is to print without error.
Cube_PLA_1h10m51s.zip
Project file & Debug log uploads
zip file containing the gcode that caused the error attached
Checklist of files to include
Anything else?
No response