diff --git a/script/prepare-pi.sh b/script/prepare-pi.sh
index 4f6d0ac..e0c8a35 100644
--- a/script/prepare-pi.sh
+++ b/script/prepare-pi.sh
@@ -5,10 +5,10 @@ sudo apt-get update
 sudo apt-get upgrade -y
 sudo apt-get install -y git stm32flash gcc-arm-none-eabi gcc g++ make build-essential libasio-dev libncurses-dev libssl-dev
 
-# Removing a console configuration from /boot/cmdline.txt
-sudo sed -i 's/console=serial0,115200 //g' /boot/cmdline.txt
+# Removing a console configuration from /boot/firmware/cmdline.txt
+sudo sed -i 's/console=serial0,115200 //g' /boot/firmware/cmdline.txt
 
-# Determining the model of Raspberry Pi to adjust /boot/config.txt accordingly
+# Determining the model of Raspberry Pi to adjust /boot/firmware/config.txt accordingly
 model=$(tr -d '\0' < /proc/device-tree/model)
 overlay="dtoverlay=disable-bt"
 if echo "$model" | grep -q "Raspberry Pi 3"; then
@@ -16,7 +16,7 @@ if echo "$model" | grep -q "Raspberry Pi 3"; then
 fi
 
 # Adding the correct overlay to /boot/config.txt
-echo "$overlay" | sudo tee -a /boot/config.txt
+echo "$overlay" | sudo tee -a /boot/firmware/config.txt
 
 # Prompt user to select device type
 read -p "Install for hotspots (h) or repeater boards (r)? " choice < /dev/tty