diff --git a/CHANGELOG.md b/CHANGELOG.md
index 5402276..aa82f94 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -1,6 +1,13 @@
 ## LOGAN development version
+
+- Removed old bindpaths and fixed ` /gs10 doesn't exist` error (#107, @samarth8392)
+- Increased pipeline walltime for slurm submission to 100 hours (#107, @samarth8392)
+- Minor documentation updates for setup and running LOGAN (#107, @samarth8392)
+
+## LOGAN 0.3.2
+
 - Uses Nextflow v25 for logan run; fixes the bug in stub run in nf v24.10 (see: https://github.com/nextflow-io/nextflow/issues/5456) (#99, @samarth8392)
-- 
+
 ## LOGAN 0.3.1
 
 - Improve help message for `logan run`. (#97, @kelly-sovacool)
diff --git a/README.md b/README.md
index e489fae..807de47 100644
--- a/README.md
+++ b/README.md
@@ -27,21 +27,24 @@ Original pipelining and code forked from the CCBR Exome-seek Pipeline [Exome-see
 
 **Requires:** `singularity>=3.5` `nextflow>=22.10.2`
 
-[singularity](https://singularity.lbl.gov/all-releases) must be installed on the target system. Snakemake orchestrates the execution of each step in the pipeline. To guarantee the highest level of reproducibility, each step relies on versioned images from [DockerHub](https://hub.docker.com/orgs/nciccbr/repositories). Nextflow uses singularity to pull these images onto the local filesystem prior to job execution, and as so, nextflow and singularity are the only two dependencies.
+[singularity](https://singularity.lbl.gov/all-releases) must be installed on the target system. Nextflow orchestrates the execution of each step in the pipeline. To guarantee the highest level of reproducibility, each step relies on versioned images from [DockerHub](https://hub.docker.com/orgs/nciccbr/repositories). Nextflow uses singularity to pull these images onto the local filesystem prior to job execution, and as so, nextflow and singularity are the only two dependencies.
 
-## Setup
+## Set up
 
-LOGAN can be used with the Nextflow pipelining software in
-Please clone this repository to your local filesystem using the following command on Biowulf:
+LOGAN is installed on the [Biowulf HPC](#biowulf).
+For installation in other execution environments, refer to the [docs](https://ccbr.github.io/LOGAN/).
 
-```bash
+### Biowulf
+
+LOGAN is available on [Biowulf](https://hpc.nih.gov/) in the `ccbrpipeliner` module.
+You'll first need to start an interactive session, then load the module:
+
+```sh
 # start an interactive node
 sinteractive --mem=2g --cpus-per-task=2 --gres=lscratch:200
 
-git clone https://github.com/CCBR/LOGAN
-module load nextflow
-##Example run
-nextflow run LOGAN/main.nf -profile ci_stub -preview
+# load the ccbrpipeliner module
+module load ccbrpipeliner
 ```
 
 ## Usage
@@ -65,8 +68,10 @@ LOGAN supports inputs of either
 Example
 
 ```bash
-c130863309_TUMOR   /data/nousomedr/c130863309_TUMOR.R1_001.fastq.gz  /data/nousomedr/c130863309_TUMOR.R2_001.fastq.gz
-c130889189_PBMC  /data/nousomedr/c130889189_PBMC.R1_001.fastq.gz  /data/nousomedr/c130889189_PBMC.R2_001.fastq.gz
+Sample1_TUMOR  /path/to/the/fastq/folder/Sample1_TUMOR.R1.fq.gz /path/to/the/fastq/folder/Sample1_TUMOR.R2.fq.gz
+Sample1_NORMAL  /path/to/the/fastq/folder/Sample1_NORMAL.R1.fq.gz /path/to/the/fastq/folder/Sample1_NORMAL.R2.fq.gz
+Sample2_TUMOR  /path/to/the/fastq/folder/Sample2_TUMOR.R1.fq.gz /path/to/the/fastq/folder/Sample2_TUMOR.R2.fq.gz
+Sample2_NORMAL  /path/to/the/fastq/folder/Sample2_NORMAL.R1.fq.gz /path/to/the/fastq/folder/Sample2_NORMAL.R2.fq.gz
 ```
 
 `--bam_file_input` - A headerless tab delimited sheet that has the sample name, bam, and bam index (bai) file locations
@@ -74,8 +79,8 @@ c130889189_PBMC  /data/nousomedr/c130889189_PBMC.R1_001.fastq.gz  /data/nousomed
 Example
 
 ```bash
-c130863309_TUMOR   /data/nousomedr/c130863309_TUMOR.bam  /data/nousomedr/c130863309_TUMOR.bam.bai
-c130889189_PBMC  /data/nousomedr/c130889189_PBMC.bam  /data/nousomedr/c130889189_PBMC.bam.bai
+Sample1_TUMOR   /path/to/the/BAM/folder/Sample1_TUMOR.bam  /path/to/the/BAM/folder/Sample1_TUMOR.bam.bai
+Sample1_NORMAL  /path/to/the/BAM/folder/Sample1_NORMAL.bam  /path/to/the/BAM/folder/Sample1_NORMAL.bam.bai
 ```
 
 ### Genome
@@ -104,8 +109,8 @@ Example
 
 ```bash
 Tumor  Normal
-c130863309_TUMOR  c130863309_PBMC
-c130889189_TUMOR  c130889189_PBMC
+Sample1_TUMOR  Sample1_Normal
+Sample2_TUMOR  Sample1_Normal
 ```
 
 #### 2. Tumor only mode
@@ -146,23 +151,68 @@ Example: `--svcallers gridss`
 Example of Tumor_Normal calling mode
 
 ```bash
-# preview the logan jobs that will run
-nextflow run LOGAN/main.nf --mode local -profile ci_stub --genome hg38 --sample_sheet samplesheet.tsv --outdir out --fastq_input "*R{1,2}.fastq.gz" -preview --vc --sv --cnv
-# run a stub/dryrun of the logan jobs
-nextflow run LOGAN/main.nf --mode local -profile ci_stub --genome hg38 --sample_sheet samplesheet.tsv --outdir out --fastq_input "*R{1,2}.fastq.gz" -stub --vc --sv --cnv
-# launch a logan run on slurm with the test dataset
-nextflow run LOGAN/main.nf --mode slurm -profile biowulf,slurm --genome hg38 --sample_sheet samplesheet.tsv --outdir out --fastq_input "*R{1,2}.fastq.gz" --vc --sv --cnv
+# Step 0: Set up
+
+sinteractive --mem=8g -N 1 -n 4
+module load ccbrpipeliner # v8 
+
+# set up directories
+
+DATADIR="/path/to/fastq/folder"
+
+# Step1: Initilalization
+
+logan init \
+--output logan_output
+
+# Step2: stub-run
+
+logan run  \
+--output logan_output \
+--mode local -profile ci_stub \
+--genome hg38 \
+--sample_sheet samplesheet.txt \
+--fastq_file_input logan_fastq_input.txt \
+-stub --vc --sv --cnv
+
+# Step3: Full run
+logan run  \
+--output logan_output \
+--mode slurm -profile slurm \
+--genome hg38 \
+--sample_sheet samplesheet.txt \
+--fastq_file_input logan_fastq_input.txt \
+--vc --sv --cnv
+
+# NOTE: In case of globbing instead of using a fastq input sheet
+
+logan run  \
+--output logan_output \
+--mode local -profile ci_stub \
+--genome hg38 \
+--sample_sheet samplesheet.txt \
+--fastq_input "/path/to/fastq/folder/*R{1,2}.fastq.gz" \
+-stub --vc --sv --cnv
+
+logan run  \
+--output logan_output \
+--mode slurm -profile slurm \
+--genome hg38 \
+--sample_sheet samplesheet.txt \
+--fastq_input "/path/to/fastq/folder/*R{1,2}.fastq.gz" \
+--vc --sv --cnv
+
 ```
 
 Example of Tumor only calling mode
 
 ```bash
 # preview the logan jobs that will run
-nextflow run LOGAN/main.nf --mode local -profile ci_stub --genome hg38 --outdir out --fastq_input "*R{1,2}.fastq.gz" --callers octopus,mutect2 -preview --vc --sv --cnv
+logan run --mode local -profile ci_stub --genome hg38 --outdir logan_output --fastq_input "*R{1,2}.fastq.gz" --callers octopus,mutect2 -preview --vc --sv --cnv
 # run a stub/dryrun of the logan jobs
-nextflow run LOGAN/main.nf --mode local -profile ci_stub --genome hg38 --outdir out --fastq_input "*R{1,2}.fastq.gz" --callers octopus,mutect2 -stub --vc --sv --cnv
+logan run --mode local -profile ci_stub --genome hg38 --outdir logan_output --fastq_input "*R{1,2}.fastq.gz" --callers octopus,mutect2 -stub --vc --sv --cnv
 # launch a logan run on slurm with the test dataset
-nextflow run LOGAN/main.nf --mode slurm -profile biowulf,slurm --genome hg38 --outdir out --fastq_input "*R{1,2}.fastq.gz" --callers octopus,mutect2 --vc --sv --cnv
+logan run --mode slurm -profile slurm --genome hg38 --outdir logan_output --fastq_input "*R{1,2}.fastq.gz" --callers octopus,mutect2 --vc --sv --cnv
 ```
 
 ### Pipeline Tools and Overview
diff --git a/assets/slurm_header_biowulf.sh b/assets/slurm_header_biowulf.sh
index ce79e61..e40c800 100644
--- a/assets/slurm_header_biowulf.sh
+++ b/assets/slurm_header_biowulf.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 #SBATCH --cpus-per-task=1
 #SBATCH --mem=1g
-#SBATCH --time=1-00:00:00
+#SBATCH --time=100:00:00
 #SBATCH --parsable
 #SBATCH -J "LOGAN"
 #SBATCH --mail-type=BEGIN,END,FAIL
diff --git a/assets/slurm_header_frce.sh b/assets/slurm_header_frce.sh
index 957972a..a55b94b 100644
--- a/assets/slurm_header_frce.sh
+++ b/assets/slurm_header_frce.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 #SBATCH --cpus-per-task=1
 #SBATCH --mem=1g
-#SBATCH --time=1-00:00:00
+#SBATCH --time=100:00:00
 #SBATCH --parsable
 #SBATCH -J "LOGAN"
 #SBATCH --mail-type=BEGIN,END,FAIL
diff --git a/conf/biowulf.config b/conf/biowulf.config
index 97c5c68..2d501f8 100644
--- a/conf/biowulf.config
+++ b/conf/biowulf.config
@@ -22,7 +22,6 @@ singularity {
     autoMounts = true
     cacheDir = "/data/CCBR_Pipeliner/SIFS"
     envWhitelist = 'https_proxy,http_proxy,ftp_proxy,DISPLAY,SLURM_JOBID,SINGULARITY_BINDPATH'
-    runOptions = '-B /gs10,/gs11,/gs12,/spin1,/data/CCBR_Pipeliner/,/vf/users,/gpfs,/fdb'
 }
 
 env.SINGULARITY_CACHEDIR = "/data/CCBR_Pipeliner/SIFS"
diff --git a/docs/index.md b/docs/index.md
index 9900632..0e0b6b4 100644
--- a/docs/index.md
+++ b/docs/index.md
@@ -1,2 +1,2 @@
-# **_LOGAN-whoLe genOme-sequencinG Analysis pipeliNe_**. Call germline and somatic variants, CNVs, and SVs and  annotate variants!
+--8<-- "README.md"
 
diff --git a/main.nf b/main.nf
old mode 100644
new mode 100755