Programming an FUID Tags-> the working procedure

[MR-Ostrich13]

Hello
i read some diffrent ways to copy / clone a chip.... so i wanne make an overview of working procedures. could you help me.
thinking of that

1. Tool: (Android App, Proxmark ...)
2. commands: (restore .....)
3. which tag:
4. result: (Works just one time, works every time, again and again...)

would be grat to have an overview of working steps and results

[pruwait]

A. Android. No need keys. Only full dump with keys inside.
Mifare Classic Tool > Tools >Import Files
Import dump > .bin ... (Proxmark...)
Choose your dump
Menu > Write Tag
Write Dump (Clone)
checked Show Options
checked Advanced: Enable writing to manufactorer block
Select dump
Select all
OK

B. Proxmark3 Easy. Need keyfile.
hf mf restore --1k -f hf-mf-9D121EF4-dump.bin -k hf-mf-9D121EF4-key.bin --force

[pruwait]

Read bambu tag just few seconds with Proxmark3.

hf mf bambukeys -r -d

hf mf dump

[pruwait]

Find bambu tag in closed spool box with proxmark3.
hf tune
it must be less 5700 for good reading.

[MR-Ostrich13]

Hey Reading and dumping still works. But the AMS destroy still the chip.
How could I prevent that ?

[exiom-xyz]

Hey Reading and dumping still works. But the AMS destroy still the chip. How could I prevent that ?

Per my testing, I only have the H2D, AMS 2 Pro and AMS HT, but I assume with firmware updates, it would be the same for all printers if not already then eventually... it would seem Gen 2 tags (CUID) no longer works and you will have to use FUID or UFUID tags

[MR-Ostrich13]

Ok but I didn't found affordable fluid sticker / tags. Could someone help. Or one time programmable is still ok. I did not need to erase them again