state.c

/*
 * From: @(#)state.c	5.10 (Berkeley) 3/22/91
 */
char state_rcsid[] = 
  "$Id: state.c,v 1.12 1999/12/12 19:41:44 dholland Exp $";

#include "telnetd.h"

int not42 = 1;

static int envvarok(char *varp);

static unsigned char doopt[] = { IAC, DO, '%', 'c', 0 };
static unsigned char dont[] = { IAC, DONT, '%', 'c', 0 };
unsigned char	will[] = { IAC, WILL, '%', 'c', 0 };
unsigned char	wont[] = { IAC, WONT, '%', 'c', 0 };

/*
 * Buffer for sub-options, and macros
 * for suboptions buffer manipulations
 */
unsigned char subbuffer[512], *subpointer=subbuffer, *subend=subbuffer;

#define	SB_CLEAR()	subpointer = subbuffer;
#define	SB_TERM()	{ subend = subpointer; SB_CLEAR(); }
#define	SB_ACCUM(c)	if (subpointer < (subbuffer + sizeof(subbuffer)-1)) { \
				*subpointer++ = (c); \
			}
#define	SB_GET()	((*subpointer++)&0xff)
#define	SB_EOF()	(subpointer >= subend)
#define	SB_LEN()	(subend - subpointer)



/*
 * State for recv fsm
 */
#define	TS_DATA		0	/* base state */
#define	TS_IAC		1	/* look for double IAC's */
#define	TS_CR		2	/* CR-LF ->'s CR */
#define	TS_SB		3	/* throw away begin's... */
#define	TS_SE		4	/* ...end's (suboption negotiation) */
#define	TS_WILL		5	/* will option negotiation */
#define	TS_WONT		6	/* wont " */
#define	TS_DO		7	/* do " */
#define	TS_DONT		8	/* dont " */

void telrcv(void) {
    register int c;
    static int state = TS_DATA;

    while (ncc > 0) {
	if ((&ptyobuf[BUFSIZ] - pfrontp) < 2) break;
	c = *netip++ & 0377;
	ncc--;

	switch (state) {
	 case TS_CR:
	     state = TS_DATA;
	     /* Strip off \n or \0 after a \r */
	     if ((c == 0) || (c == '\n')) {
		 break;
	     }
	     /* FALL THROUGH */

	 case TS_DATA:
	     if (c == IAC) {
		 state = TS_IAC;
		 break;
	     }
	     /*
	      * We now map \r\n ==> \r for pragmatic reasons.
	      * Many client implementations send \r\n when
	      * the user hits the CarriageReturn key.
	      *
	      * We USED to map \r\n ==> \n, since \r\n says
	      * that we want to be in column 1 of the next
	      * printable line, and \n is the standard
	      * unix way of saying that (\r is only good
	      * if CRMOD is set, which it normally is).
	      */
	     if ((c == '\r') && his_state_is_wont(TELOPT_BINARY)) {
		{
		     state = TS_CR;
		 }
	     }
	     *pfrontp++ = c;
	     break;

	 case TS_IAC:
	 gotiac:
	     switch (c) {
		 
		 /*
		  * Send the process on the pty side an
		  * interrupt.  Do this with a NULL or
		  * interrupt char; depending on the tty mode.
		  */
	      case IP:
		  interrupt();
		  break;
	      case BREAK:
		  sendbrk();
		  break;
		  
		  /*
		   * Are You There?
		   */
	      case AYT:
		  recv_ayt();
		  break;

		  /*
		   * Abort Output
		   */
	      case AO:
		  {
		      static const char msg[] = { IAC, DM };
		      ptyflush();	/* half-hearted */
		      init_termbuf();
		      
		      if (slctab[SLC_AO].sptr &&
			  *slctab[SLC_AO].sptr != (cc_t)(_POSIX_VDISABLE)) 
		      {
			  *pfrontp++ =
			      (unsigned char)*slctab[SLC_AO].sptr;
		      }

		      netclear();	/* clear buffer back */
		      sendurg(msg, sizeof(msg));
		      break;
		  }

		  /*
		   * Erase Character and
		   * Erase Line
		   */
	      case EC:
	      case EL:
		 {
		     cc_t ch;
		     ptyflush();	/* half-hearted */
		     init_termbuf();
		     if (c == EC) ch = *slctab[SLC_EC].sptr;
		     else ch = *slctab[SLC_EL].sptr;
		     if (ch != (cc_t)(_POSIX_VDISABLE))
			 *pfrontp++ = (unsigned char)ch;
		     break;
		 }
		  
		  /*
		   * Check for urgent data...
		   */
	      case DM:
		  SYNCHing = stilloob(net);
		  settimer(gotDM);
		  break;
		  
		  /*
		   * Begin option subnegotiation...
		   */
	      case SB:
		  state = TS_SB;
		  SB_CLEAR();
		  continue;

	      case WILL:
		  state = TS_WILL;
		  continue;

	      case WONT:
		  state = TS_WONT;
		  continue;

	      case DO:
		  state = TS_DO;
		  continue;
		  
	      case DONT:
		  state = TS_DONT;
		  continue;

	      case EOR:
		  if (his_state_is_will(TELOPT_EOR)) doeof();
		  break;
		  
		  /*
		   * Handle RFC 10xx Telnet linemode option additions
		   * to command stream (EOF, SUSP, ABORT).
		   */
	      case xEOF:
		  doeof();
		  break;
		  
	      case SUSP:
		  sendsusp();
		  break;

	      case ABORT:
		  sendbrk();
		  break;

	      case IAC:
		 *pfrontp++ = c;
		  break;
	     }
	     state = TS_DATA;
	     break;

	 case TS_SB:
	     if (c == IAC) {
		 state = TS_SE;
	     } 
	     else {
		 SB_ACCUM(c);
	     }
	     break;
	     
	 case TS_SE:
	     if (c != SE) {
		 if (c != IAC) {
				/*
				 * bad form of suboption negotiation.
				 * handle it in such a way as to avoid
				 * damage to local state.  Parse
				 * suboption buffer found so far,
				 * then treat remaining stream as
				 * another command sequence.
				 */
		     
				/* for DIAGNOSTICS */
		     SB_ACCUM(IAC);
		     SB_ACCUM(c);
		     subpointer -= 2;
		     
		     SB_TERM();
		     suboption();
		     state = TS_IAC;
		     goto gotiac;
		 }
		 SB_ACCUM(c);
		 state = TS_SB;
	     }
	     else {
		 /* for DIAGNOSTICS */
		 SB_ACCUM(IAC);
		 SB_ACCUM(SE);
		 subpointer -= 2;
		 
		 SB_TERM();
		 suboption();	/* handle sub-option */
		 state = TS_DATA;
	     }
	     break;
	     
	 case TS_WILL:
	     willoption(c);
	     state = TS_DATA;
	     continue;

	 case TS_WONT:
	     wontoption(c);
	     state = TS_DATA;
	     continue;

	 case TS_DO:
	     dooption(c);
	     state = TS_DATA;
	     continue;
	     
	 case TS_DONT:
	     dontoption(c);
	     state = TS_DATA;
	     continue;
	     
	 default:
	     printf("telnetd: panic state=%d\n", state);
	     exit(1);
	}
    }
}

/*
 * The will/wont/do/dont state machines are based on Dave Borman's
 * Telnet option processing state machine.
 *
 * These correspond to the following states:
 *	my_state = the last negotiated state
 *	want_state = what I want the state to go to
 *	want_resp = how many requests I have sent
 * All state defaults are negative, and resp defaults to 0.
 *
 * When initiating a request to change state to new_state:
 * 
 * if ((want_resp == 0 && new_state == my_state) || want_state == new_state) {
 *	do nothing;
 * } else {
 *	want_state = new_state;
 *	send new_state;
 *	want_resp++;
 * }
 *
 * When receiving new_state:
 *
 * if (want_resp) {
 *	want_resp--;
 *	if (want_resp && (new_state == my_state))
 *		want_resp--;
 * }
 * if ((want_resp == 0) && (new_state != want_state)) {
 *	if (ok_to_switch_to new_state)
 *		want_state = new_state;
 *	else
 *		want_resp++;
 *	send want_state;
 * }
 * my_state = new_state;
 *
 * Note that new_state is implied in these functions by the function itself.
 * will and do imply positive new_state, wont and dont imply negative.
 *
 * Finally, there is one catch.  If we send a negative response to a
 * positive request, my_state will be the positive while want_state will
 * remain negative.  my_state will revert to negative when the negative
 * acknowlegment arrives from the peer.  Thus, my_state generally tells
 * us not only the last negotiated state, but also tells us what the peer
 * wants to be doing as well.  It is important to understand this difference
 * as we may wish to be processing data streams based on our desired state
 * (want_state) or based on what the peer thinks the state is (my_state).
 *
 * This all works fine because if the peer sends a positive request, the data
 * that we receive prior to negative acknowlegment will probably be affected
 * by the positive state, and we can process it as such (if we can; if we
 * can't then it really doesn't matter).  If it is that important, then the
 * peer probably should be buffering until this option state negotiation
 * is complete.
 *
 */
void send_do(int option, int init) {
    if (init) {
	if ((do_dont_resp[option] == 0 && his_state_is_will(option)) ||
	    his_want_state_is_will(option))
	    return;
	/*
	 * Special case for TELOPT_TM:  We send a DO, but pretend
	 * that we sent a DONT, so that we can send more DOs if
	 * we want to.
	 */
	if (option == TELOPT_TM)
	    set_his_want_state_wont(option);
	else
	    set_his_want_state_will(option);
	do_dont_resp[option]++;
    }
    netoprintf((char *)doopt, option);
    
}



void willoption(int option) {
    int changeok = 0;
    void (*func)(void) = 0;
    
    /*
     * process input from peer.
     */
    
    
    if (do_dont_resp[option]) {
	do_dont_resp[option]--;
	if (do_dont_resp[option] && his_state_is_will(option))
	    do_dont_resp[option]--;
    }
    if (do_dont_resp[option] == 0) {
	if (his_want_state_is_wont(option)) {
	    switch (option) {
		
	    case TELOPT_BINARY:
		init_termbuf();
		tty_binaryin(1);
		set_termbuf();
		changeok++;
		break;
		
	    case TELOPT_ECHO:
		/*
		 * See comments below for more info.
		 */
		not42 = 0;	/* looks like a 4.2 system */
		break;
		
	    case TELOPT_TM:
		/*
		 * We never respond to a WILL TM, and
		 * we leave the state WONT.
		 */
		return;

	    case TELOPT_LFLOW:
		 /*
		  * If we are going to support flow control
		  * option, then don't worry peer that we can't
		  * change the flow control characters.
		  */
		slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS;
		slctab[SLC_XON].defset.flag |= SLC_DEFAULT;
		slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS;
		slctab[SLC_XOFF].defset.flag |= SLC_DEFAULT;
	    case TELOPT_TTYPE:
	    case TELOPT_SGA:
	    case TELOPT_NAWS:
	    case TELOPT_TSPEED:
	    case TELOPT_XDISPLOC:
	    case TELOPT_ENVIRON:
		changeok++;
		break;
		
		
		

	    default:
		break;
	    }
	    if (changeok) {
		set_his_want_state_will(option);
		send_do(option, 0);
	    } 
	    else {
		do_dont_resp[option]++;
		send_dont(option, 0);
	    }
	} 
	else {
	    /*
	     * Option processing that should happen when
	     * we receive conformation of a change in
	     * state that we had requested.
	     */
	    switch (option) {
	     case TELOPT_ECHO:
		not42 = 0;	/* looks like a 4.2 system */
		/*
		 * Egads, he responded "WILL ECHO".  Turn
		 * it off right now!
		 */
		send_dont(option, 1);
		/*
		 * "WILL ECHO".  Kludge upon kludge!
		 * A 4.2 client is now echoing user input at
		 * the tty.  This is probably undesireable and
		 * it should be stopped.  The client will
		 * respond WONT TM to the DO TM that we send to
		 * check for kludge linemode.  When the WONT TM
		 * arrives, linemode will be turned off and a
		 * change propogated to the pty.  This change
		 * will cause us to process the new pty state
		 * in localstat(), which will notice that
		 * linemode is off and send a WILL ECHO
		 * so that we are properly in character mode and
		 * all is well.
		 */
		break;

	    }
	}
    }
    set_his_state_will(option);
    if (func) (*func)();
}

void send_dont(int option, int init) {
    if (init) {
	if ((do_dont_resp[option] == 0 && his_state_is_wont(option)) ||
	    his_want_state_is_wont(option))
	    return;
	set_his_want_state_wont(option);
	do_dont_resp[option]++;
    }
    netoprintf((char *) dont, option);

}

void wontoption(int option) {
    /*
     * Process client input.
     */

    
    if (do_dont_resp[option]) {
	do_dont_resp[option]--;
	if (do_dont_resp[option] && his_state_is_wont(option))
	    do_dont_resp[option]--;
    }
    if (do_dont_resp[option] == 0) {
	if (his_want_state_is_will(option)) {
	    /* it is always ok to change to negative state */
	    switch (option) {
	    case TELOPT_ECHO:
		not42 = 1; /* doesn't seem to be a 4.2 system */
		break;
		
	    case TELOPT_BINARY:
		init_termbuf();
		tty_binaryin(0);
		set_termbuf();
		break;
		
		
	    case TELOPT_TM:
		/*
		 * If we get a WONT TM, and had sent a DO TM,
		 * don't respond with a DONT TM, just leave it
		 * as is.  Short circut the state machine to
		 * achive this.
		 */
		set_his_want_state_wont(TELOPT_TM);
		return;
		
	    case TELOPT_LFLOW:
		/*
		 * If we are not going to support flow control
		 * option, then let peer know that we can't
		 * change the flow control characters.
		 */
		slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS;
		slctab[SLC_XON].defset.flag |= SLC_CANTCHANGE;
		slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS;
		slctab[SLC_XOFF].defset.flag |= SLC_CANTCHANGE;
		break;
		

		/*
		 * For options that we might spin waiting for
		 * sub-negotiation, if the client turns off the
		 * option rather than responding to the request,
		 * we have to treat it here as if we got a response
		 * to the sub-negotiation, (by updating the timers)
		 * so that we'll break out of the loop.
		 */
	    case TELOPT_TTYPE:
		settimer(ttypesubopt);
		break;

	    case TELOPT_TSPEED:
		settimer(tspeedsubopt);
		break;

	    case TELOPT_XDISPLOC:
		settimer(xdisplocsubopt);
		break;
		
	    case TELOPT_ENVIRON:
		settimer(environsubopt);
		break;

	    default:
		break;
	    }
	    set_his_want_state_wont(option);
	    if (his_state_is_will(option)) send_dont(option, 0);
	} 
	else {
	    switch (option) {
	     case TELOPT_TM:
		 break;

	    default:
		break;
	    }
	}
    }
}  /* end of wontoption */

void send_will(int option, int init) {
    if (init) {
	if ((will_wont_resp[option] == 0 && my_state_is_will(option))||
	    my_want_state_is_will(option))
	    return;
	set_my_want_state_will(option);
	will_wont_resp[option]++;
    }
    netoprintf((char *) will, option);

}

int turn_on_sga = 0; 
void dooption(int option) {
    int changeok = 0;

    /*
     * Process client input.
     */
    
    
    if (will_wont_resp[option]) {
	will_wont_resp[option]--;
	if (will_wont_resp[option] && my_state_is_will(option))
	    will_wont_resp[option]--;
    }
    if ((will_wont_resp[option] == 0) && (my_want_state_is_wont(option))) {
	switch (option) {
	case TELOPT_ECHO:
	    {
		init_termbuf();
		tty_setecho(1);
		set_termbuf();
	    }
	    changeok++;
	    break;

	case TELOPT_BINARY:
	    init_termbuf();
	    tty_binaryout(1);
	    set_termbuf();
	    changeok++;
	    break;

	case TELOPT_SGA:
	    turn_on_sga = 0;
	    changeok++;
	    break;

	case TELOPT_STATUS:
	    changeok++;
	    break;
	    
	case TELOPT_TM:
	    /*
	     * Special case for TM.  We send a WILL, but
	     * pretend we sent a WONT.
	     */
	    send_will(option, 0);
	    set_my_want_state_wont(option);
	    set_my_state_wont(option);
	    return;
	    
	case TELOPT_LOGOUT:
	    /*
	     * When we get a LOGOUT option, respond
	     * with a WILL LOGOUT, make sure that
	     * it gets written out to the network,
	     * and then just go away...
	     */
	    set_my_want_state_will(TELOPT_LOGOUT);
	    send_will(TELOPT_LOGOUT, 0);
	    set_my_state_will(TELOPT_LOGOUT);
	    (void)netflush();
	    cleanup(0);
	    /* NOT REACHED */
	    break;

	case TELOPT_LINEMODE:
	case TELOPT_TTYPE:
	case TELOPT_NAWS:
	case TELOPT_TSPEED:
	case TELOPT_LFLOW:
	case TELOPT_XDISPLOC:
	case TELOPT_ENVIRON:
	default:
	    break;
	}
	if (changeok) {
	    set_my_want_state_will(option);
	    send_will(option, 0);
	} 
	else {
	    will_wont_resp[option]++;
	    send_wont(option, 0);
	}
    }
    set_my_state_will(option);
}

void send_wont(int option, int init) {
    if (init) {
	if ((will_wont_resp[option] == 0 && my_state_is_wont(option)) ||
	    my_want_state_is_wont(option))
	    return;
	set_my_want_state_wont(option);
	will_wont_resp[option]++;
    }
    netoprintf((char *)wont, option);
    
}

void dontoption(int option) {
    /*
     * Process client input.
     */

    if (will_wont_resp[option]) {
	will_wont_resp[option]--;
	if (will_wont_resp[option] && my_state_is_wont(option))
	    will_wont_resp[option]--;
    }
    if ((will_wont_resp[option] == 0) && (my_want_state_is_will(option))) {
	switch (option) {
	case TELOPT_BINARY:
	    init_termbuf();
	    tty_binaryout(0);
	    set_termbuf();
	    break;

	case TELOPT_ECHO:	/* we should stop echoing */
	    {
		init_termbuf();
		tty_setecho(0);
		set_termbuf();
	    }
	    break;

	case TELOPT_SGA:
	    set_my_want_state_wont(option);
	    if (my_state_is_will(option))
		send_wont(option, 0);
	    set_my_state_wont(option);
	    if (turn_on_sga ^= 1) send_will(option,1);
	    return;
	    
	 default:
	    break;
	}

	set_my_want_state_wont(option);
	if (my_state_is_will(option))
	    send_wont(option, 0);
    }
    set_my_state_wont(option);
}

/*
 * suboption()
 *
 *	Look at the sub-option buffer, and try to be helpful to the other
 * side.
 *
 *	Currently we recognize:
 *
 *	Terminal type is
 *	Linemode
 *	Window size
 *	Terminal speed
 */
void suboption(void) {
    int subchar;


    subchar = SB_GET();
    switch (subchar) {
     case TELOPT_TSPEED: {
	int xspeed, rspeed;
	if (his_state_is_wont(TELOPT_TSPEED))	/* Ignore if option disabled */
	    break;

	settimer(tspeedsubopt);
	if (SB_EOF() || SB_GET() != TELQUAL_IS) return;
	xspeed = atoi((char *)subpointer);

	while (SB_GET() != ',' && !SB_EOF());
	if (SB_EOF()) return;
	
	rspeed = atoi((char *)subpointer);
	clientstat(TELOPT_TSPEED, xspeed, rspeed);
	break;
    }

    case TELOPT_TTYPE: {		/* Yaaaay! */
	static char terminalname[41];

	if (his_state_is_wont(TELOPT_TTYPE))	/* Ignore if option disabled */
	    break;
	settimer(ttypesubopt);
	
	if (SB_EOF() || SB_GET() != TELQUAL_IS) {
	    return;		/* ??? XXX but, this is the most robust */
	}

	terminaltype = terminalname;

	while ((terminaltype < (terminalname + sizeof (terminalname) -1) ) &&
	       !SB_EOF()) 
	{
	    int c;
	    c = SB_GET();
	    if (isupper(c)) {
		c = tolower(c);
	    }
	    *terminaltype++ = c;    /* accumulate name */
	}
	*terminaltype = 0;
	terminaltype = terminalname;
	break;
    }

    case TELOPT_NAWS: {
	int xwinsize, ywinsize;
	if (his_state_is_wont(TELOPT_NAWS))	/* Ignore if option disabled */
	    break;

	if (SB_EOF()) return;
	xwinsize = SB_GET() << 8;
	if (SB_EOF()) return;
	xwinsize |= SB_GET();
	if (SB_EOF()) return;
	ywinsize = SB_GET() << 8;
	if (SB_EOF()) return;
	ywinsize |= SB_GET();
	clientstat(TELOPT_NAWS, xwinsize, ywinsize);
	break;
    }

    case TELOPT_STATUS: {
	int mode;

	if (SB_EOF())
	    break;
	mode = SB_GET();
	switch (mode) {
	case TELQUAL_SEND:
	    if (my_state_is_will(TELOPT_STATUS))
		send_status();
	    break;

	case TELQUAL_IS:
	    break;

	default:
	    break;
	}
	break;
    }  /* end of case TELOPT_STATUS */

    case TELOPT_XDISPLOC: {
	if (SB_EOF() || SB_GET() != TELQUAL_IS)
		return;
	settimer(xdisplocsubopt);
	subpointer[SB_LEN()] = '\0';
	(void)setenv("DISPLAY", (char *)subpointer, 1);
	break;
    }  /* end of case TELOPT_XDISPLOC */

    case TELOPT_ENVIRON: {
	register int c;
	register char *cp, *varp, *valp;

	if (SB_EOF())
		return;
	c = SB_GET();
	if (c == TELQUAL_IS)
		settimer(environsubopt);
	else if (c != TELQUAL_INFO)
		return;

	while (!SB_EOF()) {
	    c = SB_GET();
	    if (c == ENV_VAR || c == ENV_USERVAR)
		break;
	}

	if (SB_EOF())
		return;

	///is_uservar = (c == ENV_USERVAR) ? 1 : 0;

	cp = varp = (char *)subpointer;
	valp = 0;

	while (!SB_EOF()) {
	    switch (c = SB_GET()) {
	    case ENV_VALUE:
		*cp = '\0';
		cp = valp = (char *)subpointer;
		break;
		
	    case ENV_USERVAR:
	    case ENV_VAR:
		*cp = '\0';
		if (envvarok(varp)
		   ) {
		    if (valp)
			(void)setenv(varp, valp, 1);
		    else
			unsetenv(varp);
		}
		cp = varp = (char *)subpointer;
		valp = 0;
		break;
		
	    case ENV_ESC:
		if (SB_EOF())
		    break;
		c = SB_GET();
		/* FALL THROUGH */
	    default:
	        /* I think this test is correct... */
		if ((unsigned long)cp < (unsigned long)subbuffer+sizeof(subbuffer)-1) *cp++ = c;
		break;
	    }
	}
	*cp = '\0';
	if (envvarok(varp)
	   ) {
	    if (valp)
		(void)setenv(varp, valp, 1);
	    else
		unsetenv(varp);
	}
	break;
    }  /* end of case TELOPT_ENVIRON */

    default:
	break;
    }  /* end of switch */

}  /* end of suboption */


#define	ADD(c)	 *ncp++ = c;
#define	ADD_DATA(c) { *ncp++ = c; if (c == SE) *ncp++ = c; }

void send_status(void) {
    unsigned char statusbuf[256];
    register unsigned char *ncp;
    register unsigned char i;
    
    ncp = statusbuf;
    
    netflush();	/* get rid of anything waiting to go out */
    
    ADD(IAC);
    ADD(SB);
    ADD(TELOPT_STATUS);
    ADD(TELQUAL_IS);
    
    /*
     * We check the want_state rather than the current state,
     * because if we received a DO/WILL for an option that we
     * don't support, and the other side didn't send a DONT/WONT
     * in response to our WONT/DONT, then the "state" will be
     * WILL/DO, and the "want_state" will be WONT/DONT.  We
     * need to go by the latter.
     */
    for (i = 0; i < NTELOPTS; i++) {
	if (my_want_state_is_will(i)) {
	    ADD(WILL);
	    ADD_DATA(i);
	    if (i == IAC) ADD(IAC);
	}
	if (his_want_state_is_will(i)) {
	    ADD(DO);
	    ADD_DATA(i);
	    if (i == IAC) ADD(IAC);
	}
    }

    if (his_want_state_is_will(TELOPT_LFLOW)) {
	ADD(SB);
	ADD(TELOPT_LFLOW);
	ADD(flowmode);
	ADD(SE);
    }


    ADD(IAC);
    ADD(SE);

    writenet(statusbuf, ncp - statusbuf);
    netflush();	/* Send it on its way */

}

/* check that variable is safe to pass to login or shell */
#if 0  /* insecure version */
static int envvarok(char *varp) {
    if (strncmp(varp, "LD_", strlen("LD_")) &&
	strncmp(varp, "ELF_LD_", strlen("ELF_LD_")) &&
	strncmp(varp, "AOUT_LD_", strlen("AOUT_LD_")) &&
	strncmp(varp, "_RLD_", strlen("_RLD_")) &&
	strcmp(varp, "LIBPATH") &&
	strcmp(varp, "ENV") &&
	strcmp(varp, "IFS")) 
    {
	return 1;
    } 
    else {
	/* optionally syslog(LOG_INFO) here */
	return 0;
    }
}

#else
static int envvarok(char *varp) {
    /*
     * Allow only these variables.
     */
    if (!strcmp(varp, "TERM")) return 1;
    if (!strcmp(varp, "DISPLAY")) return 1;
    if (!strcmp(varp, "USER")) return 1;
    if (!strcmp(varp, "LOGNAME")) return 1;
    if (!strcmp(varp, "POSIXLY_CORRECT")) return 1;
    if (!strcmp(varp, "LANG")) return 1;
    if (!strncmp(varp, "LC_", 3)) return 1;

    /* optionally syslog(LOG_INFO) here */
    return 0;
}

#endif